- ページ 9

アンプ Pioneer VSA-1000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer VSA-1000 35 ページ。 Av digital surround amplifier
Pioneer VSA-1000 にも：取扱説明書 (35 ページ)

ページを印刷する

FRONT PANEL FACILITIES

@ VCR NOISE FILTER switch

The noise filter only removes noise from the sound.

if tape hiss is noticeable while performing playback of video cassette

tapes, press this switch to reduce the noise. The display section VCR

NOISE FILTER indicator will light.

NOTE:

7 or VCR 2 function

switches is selected.

¢ The effectiveness in reducing high-frequency hiss noise varies

depending on the type of tape used, the recording level, and other

conditions.

VCR 1 REC SEL switch/indicator

Press this switch to change the source from which the VCR1 will record

in the following order.

-—* VCR 2-*VCR

3-™VDP

VIDEO

1-*VIDEO aa

The display indicator lights to show this.

If you set the REC SEL SOURCE switch to ON then the VCR 1 REC SEL

indicator will go out. Picture and sound can then be recorded from the

source selected by the video input selector.

@ VCR 1 MODE switch

Set this switch ON, when using a VCR with monaural audio output.

For both monaural input and output turn this switch on. It functions

when the VCR 1 inputs are selected. The display section MONO

indicator will light.

@ SIMULATED STEREO switch

Press to produce a simulated stereo effect when listening to monaural

sources (for example AM or TV broadcasts). The indicator will light.

NOTE:

This effect is not produced through the surround rear speakers.

Audio input selector switches/indicators

TAPE 1/DAT 1:

Press to listen to the sound from the cassette deck or DAT connected

to the TAPE 1/DAT 1 jacks.

TAPE 2/DAT 2 MONITOR:

Press to listen to the sound from the cassette deck or DAT connected

to the TAPE 2/DAT 2 jacks.

The TAPE 2/DAT 2 MONITOR is independent of other audio input

selector switches and can be switched ON/OFF independently. In the

ON position, the TAPE 2 indicator in the display section lights.

LINE:

Press to listen to the sound from the component connected to the LINE

INPUT jacks.

CD:

Press to listen to the playback sound from the CD player connected to

the CD jacks.

TUNER:

Press to listen to AM or FM broadcasts with the tuner connected to

the TUNER jacks.

PHONO:

Press to listen to the sound from the turntable connected to the PHONO

Jacks.

NOTE:

When playing anything other than TAPE 2/DAT 2, set the TAPE 2/

DAT 2 MONITOR switch to OFF {TAPE 2 indicator is out).

Video input selector switches

VCR 1:

Press this switch when playing back a tape in the video cassette recorder

connected to the VCR 1 jacks.

VCR 2:

Press this switch when playing back a tape in the video cassette recorder

connected to the VCR 2 jacks.

VCR 3:

Press this switch when playing back a tape in the video cassette recorder

connected to the VCR 3 jacks.

VDP:

Press to watch a program from a video disc player connected to the

VDP jacks,

TV:

Press to watch TV programs (reception with a TV tuner connected to

the TV jacks).

VIDEO 1:

Press this when

playing from

equipment

(satellite receiver,

etc.)

connected to VIDEO 1 jack.

VIDEO 2;

Press this when playing from equipment (video camera etc.) connected

to VIDEO 2 INPUT jack on the front panel.

VIDEO ADAPTOR switch

Press to obtain a video signal passed through an external video signal

processor connected to the VIDEO ADAPTOR jacks.

Be sure to set to OFF when not using the VIDEO ADAPTOR jacks.

The video adaptor switch cannot be used with components connected

by an S-VIDEO lights.

VIDEO 2 INPUT jacks

Video components such as a video camera can be connected here.