- ページ 25
アンプ Pioneer VSA-700のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer VSA-700 30 ページ。 Av digital surround amplifier
ページを印刷する
USE OF LEARNING FUNCTIONS
Questions and Answers about the Learning
Function
Q:
The remote
contro!
unit of my VCR
has two REC
(recording) keys. They both have to be pressed at the same
time to start recording. What is the learning procedure in this
case?
A? Hold one of the keys on the programmable remote control
depressed (for example the VCR
@ key) until the LEARN
indicator lights up, and then press the two keys on the VCR
remote control simultaneously.
Q: The remote contro! unit of my VCR has a REC (recording)
key and a PLAY (playback) key and they both have to be
pressed at the same time to start recording. What is the learning
procedure in this case?
A? Hold one of the keys on the programmable remote control
depressed (for example the VCR
@ key) until the LEARN
indicator lights up, and then press the REC and PLAY keys
on the VCR remote control simultaneously.
¢ As described above, operations which require two keys to
be pressed at the same time are programmed by pressing
the two keys simultaneously.
Operating
other
programmable remote control unit
1.
Setthe LEARN switch of the programmable remote control
unit to the USE position.
2.
Set the TRANSMIT mode selector switch to the desired
position (AUDIO/VIDEO/AUX).
¢ Set to the VIDEO position for programming as described
in the example.
3.
Press the key of the desired function.
|
e The TRANSMIT indicator lights up while the remote
control unit is sending codes.
Note:
e When
operating
programmed
keys, always set the
LEARN selector switch to the USE position. Operation
is not possible in the LEARN position.
¢
For functions which require two keys to be pressed at
the same time (recording etc.) or functions for which
several codes are sent simultaneously (auto functions,
timer programming, etc.) the programming procedure
is different and improper operation may: occur.
equipment
by
the.
Returning to the Initial Settings
1.
2:
3.
4,
Set the LEARN selector switch to the LEARN position.
Remove the battery cover.
Cover
Fo
Press one of the LEARN keys. The LEARN indicator will
light up.
Use a ball-point pen or similar object to press the RESET
key while the LEARN indicator is flashing.
Reset button
¢ The programmed functions for the AUDIO, VIDEO and
AUX positions are cleared, and the remote control unit
is reset to the Pioneer uniform remote control codes.
¢
Do not press the keys with too much force.
25
<ARE1065 >