- ページ 19

CDプレーヤー Pioneer CDJ-1000MK2のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer CDJ-1000MK2 20 ページ。 Compact disc player

ページを印刷する

Error message display

When the CDJ-1000MK2 CD player is unable to operate properly, an error code is

displayed on the display panel. Check the error code displayed against the follow-

ing table and take the recommended action to correct the error. If an error code

other than any of the error codes listed in the table below is displayed or if the same

error code is displayed even after corrective action has been taken, contact your

nearest Pioneer Service Station or contact the store from which you purchased your

player for assistance.

Error Code

Error Type

E-72 01

TOC READ ERROR

E-83 01

PLAYER ERROR

E-83 02

E-83 03

E-91 01

MECHANICAL TIME OUT

Cleaning the Jog Dial

To clean the PLAYER wipe with a polishing or a soft, dry cloth. For stubborn dirt,

moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six

parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe

the surface dry. Applying alcohol, paint thinner, benzene, insecticides, or other

stringent substances to the Jog dial may cause the markings or finishing of the dial

to peel or become discolored, and the use of any such substances should accord-

ingly be avoided.

Should this product require service in the U.S.A. and you

wish to locate the nearest Pioneer Authorized Independent

Service Company, or if you wish to purchase replacement

parts, operating instructions, service manuals, or

accessories, please call the number shown below.

800 – 782 – 7210

Please do not ship your product to Pioneer without first

calling the Customer Support Division at the above listed

number for assistance.

Pioneer Electronics (USA) Inc.

Customer Support Division

P.O. BOX 1760, Long Beach,

CA 90801-1760, U.S.A.

For warranty information please see the Limited Warranty

sheet included with your product.

Description

Player unable to read TOC data.

Disc is rotating, but rotation cannot be ascertained.

Player unable to play back currently inserted disc.

Mechanical operation has failed to complete within

specified time interval.

OTHERS: TROUBLESHOOTING

Possible cause and recommended action

Disc is cracked.

= Recommended action: replace disc.

Disc is soiled or dirty.

= Recommended action: clean disc.

If other discs play normally, the problem is with the disc itself.

Dust or some other form of foreign particles have found their

way into disc insertion slot.

= Recommended action: remove dust or other foreign par-

ticles.

Should this product require service in Canada, please con-

tact a Pioneer Canadian Authorized Dealer to locate the

nearest Pioneer Authorized Service Company in Canada.

Alternatively, please contact the Customer Service Depart-

ment at the following address:

Pioneer Electronics of Canada, Inc.

Customer Satisfaction Department

300 Allstate Parkway

Markham, Ontario L3R OP2

(905) 479-4411

1 (877) 283-5901

For warranty information please see the Limited

Warranty sheet included with your product.