ページを印刷する
ORDINARY CD PLAYER OPERATIONS
D
PROFESSIONAL
'
•
TIME
AUTO
MODE
CUE
TRACK
TRACK SEARCH
SEARCH
IN/REALTIME CUE
4
¢
(4, ¢)
SEARCH
OUT ADJUST
SEARCH
1
¡
(1, ¡)
CUE
–
PLAY/PAUSE
REV
6
PLAY/PAUSE
Setting the Auto Cue function ON/OFF
Press and hold the TIME MODE/AUTO CUE button for
one or more seconds to toggle the auto cue mode on
and off. The auto cue function is turned on when the
indicator light showing AUTO CUE is lit.
Playback Operations
These represent basic playback operations when the auto
cue function is off (the display's AUTO CUE indicator goes
off).
1. Press the OPEN button.
2. Insert a disc.
÷ Set the disc in the center of the tray with the label
side up.
÷ When loading an 8-cm (3-inch) disc, set the disc in
the groove in the very center of the tray.
÷ Load only one disc at a time.
3. Press the front of the disc door to close.
÷ Play will begin automatically from track 1.
÷ If the auto-cue function is set to off, playback will
not stop after the first track ends but continue
sequentially from the first track to the subsequent
tracks.
÷ Play stops automatically after the last track is
played.
To Stop Play
Press the OPEN button.
÷ Play will stop and the disc door will open.
÷ The unit is not provided with a special stop button.
CDJ-700S
COMPACT DISC PLAYER
TEMPO
±10/±16
OPEN
MASTER
TEMPO
1
OUT/EXIT
RELOOP
OPEN
LOOP
+
FWD
2, 3
TEMPO
Jog dial
To Pause Play
During playback, press the PLAY/PAUSE button
(6).
÷ The 6 indicator and cue indicator (CUE) will flash
and play will be interrupted.
÷ To resume playback, press the PLAY/PAUSE button
once again; the 6 indicator will light steadily and
playback will resume.
÷ Broken sound will still be audible during the standby
mode; if you wish to stop all sound, lower the output
sound volume on your audio mixer.
÷ When the unit has not been operated for 80 minutes
or more in pause mode, the disc rotation stops auto-
matically. In this instance, playback can be resumed
by pressing the PLAY/PAUSE button.
Track Cueing
7 TRACK SEARCH buttons (4, ¢ )
Press one of the TRACK SEARCH buttons (4, ¢ ).
÷ Each time the button is pressed, the track is cued
in the direction corresponding to the arrow on the
button (during playback of one track, to cue play-
back to the beginning of the preceding track, press
the 4 button twice).
÷ When the button is press down and held, cueing
is continuous. If the button is held for two seconds
or more, the cue speed increases.
÷ When the beginning of the first track (track 1) is
reached, pressing the 4 button will cue to the
last track.
÷ When the end of the disc's last track is reached,
pressing the ¢ button will cue to the first track
(track 1).
Fast-Forward / Fast-Reverse
7 Operation using the SEARCH buttons
Press the SEARCH buttons (1, ¡) during play-
back.
Press and hold the ¡ button to fast forward the disc;
press and hold the 1 button to do fast reverse.
BASIC OPERATION I
9
<DRB1215>
En