- ページ 7

CDプレーヤー Pioneer CMX-3000のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer CMX-3000 20 ページ。 Owner's manual
Pioneer CMX-3000 にも：取扱説明書 (33 ページ)

ページを印刷する

1. Remote Control Unit

FEATURES

The Pioneer CMX-3000 is a twin CD player designed for use by DJs which provides not only the features and performance required in

a discotheque sound system in a CD player but also provides new features only possible in a CD player.

JOG DIAL

The large 110 mm diameter Jog dial enables better handling

than an analog turntable.

÷ SCRATCH PLAY

When the jog dial is rotated in the SCRATCH mode, playback will

occur in response to the direction and speed of jog-dial rotation.

÷ PITCH BEND

This function changes the music tempo depending on direction of

Jog dial rotation and speed of movement.

÷ FRAME SEARCH

Moves the disc from pause position in frame increments (1/75 sec)

when the Jog dial is rotated in pause mode.

÷ SUPER FAST SEARCH

You can search the disc faster than normal search or track search by

holding down a SEARCH button or TRACK SEARCH button as you

turn the Jog dial.

WAVE DISPLAY

This display makes it possible to find the breakpoint between tracks

in advance and use it as mix point or end point in the same way as

you can on an analog record by checking the position of the needle

in the groove.

BPM SYNCHRO HOT CUE

Each of the players can be preset with up to three Hot Cue points (1,

2, 3), thus allowing you so begin play instantly from any of the

points. Also, by setting the BPM with either auto or TAP button, that

BPM value can be used for HOT CUE synchro playback.

TEMPO CONTROL

60 mm high-precision slider coupled with a 0.05% increment

digital display (within a ±6% range) allows exact control of speed to

make tempo adjustments easy and accurate.

÷ TEMPO CONTROL RANGE

The maximum variable range can be set to four variable ranges:

±6%, ±10%, ±16% and WIDE to facilitate adjustment.

÷ MASTER TEMPO

Changes music tempo without changing pitch.

CUE

÷ BACK CUE

After storing the Cue point in memory, press the CUE button while

playing the unit to go back to the Cue point and start over.

÷ AUTO CUE

Auto cue automatically locates the song's start point even if it

differs from the track's frame, allowing the player to start instantly

at a press of the PLAY/PAUSE (38) button.

÷ CUE POINT SAMPLER

The sound from the memorized cue point can be reproduced by one

touch, which can be used as the start point check and the sampler.

REAL TIME SEAMLESS LOOP

This function simplifies setting and releasing loops. This function

lets you set a loop while you are playing a track. A loop can also be

set at the end of the track so that the track does not stop. In

addition, an ADJUST mode has been added to enable one-touch

adjustment to the Loop-out point and facilitate loop operation.

RELOOP

Allows you to replay a loop any number of times.

Press the RELOOP button after releasing loop play to return to the

loop start point. Clever use of on and off in combination with the

rhythm make it possible to create new sound effects.

LOOP PLAY MEMORY

Loop information can be programmed in the HOT CUE button, so

the desired loop play begins instantly when accessed.

EMERGENCY LOOP

When this function is used to designate a loop in-point, the loop out-

point is automatically set and loop play begins.

PLAYING ADDRESS

This bar graph provides a visual representation of track playback

progress that enables you to see current playback position just like

you can on an analog record by checking needle position. The

length of the bar shows current position and a flashing bar provides

advance notice of track end.

SLOT IN

Discs are loaded directly without opening doors or trays, making

track selection that much faster.

FADER START

QUICK START and BACK CUE can be performed using the fader

function on DJ mixers DJM-500, DJM-600 and DJM-300 (all mixers

are sold separately).

MULTI READ

CD-R, CD-RW discs can be replayed. (However, due to certain

special characteristics of some discs, recorders as well as dirty or

damaged discs, some discs may not replay properly.)

CD TEXT

CD TEXT informations are displayed if the CD includes the CD TEXT

information.

Read before use