- ページ 18

CDプレーヤー Pioneer DEH-6400BTのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Pioneer DEH-6400BT 36 ページ。 Cd rds receiver
Pioneer DEH-6400BT にも：オーナーズマニュアル (25 ページ), クイック・スタート・マニュアル (8 ページ)

ページを印刷する

Section

Operating this unit

Special device (setting a special device)

Bluetooth devices that are difficult to establish a con-

nection with are called special devices. If your

Bluetooth device is listed as a special device, select

the appropriate one.

1 Press M.C. to display the setting mode.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

2 Turn M.C. to display a special device. Press to se-

lect.

3 Turn M.C. to display this unit's device name,

Bluetooth device address and PIN code.

4 Use a device to connect to this unit.

! To complete the connection, check the device

name (Pioneer BT Unit) and enter the PIN

code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

Auto connect (connecting to a Bluetooth device

automatically)

1 Press M.C. to turn automatic connection on or

off.

Visibility (setting the visibility of this unit)

To check the availability of this unit from other de-

vices, Bluetooth visibility of this unit can be turned

on.

1 Press M.C. to turn the visibility of this unit on or

off.

! While setting Special device, Bluetooth visibi-

lity of this unit is turned on temporarily.

Pin code input (PIN code input)

To connect your device to this unit via Bluetooth wire-

less technology, you need to enter a PIN code on your

device to verify the connection. The default code is

0000, but you can change it with this function.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select a number.

3 Press M.C. to move the cursor to the next posi-

tion.

4 After inputting PIN code, press and hold M.C.

! After inputting, pressing M.C. returns you to

the PIN code input display, and you can

change the PIN code.

Device INFO (Bluetooth device address display)

1 Press M.C. to display the setting mode.

2 Turn M.C. left to switch to the Bluetooth device

address.

Turning M.C. right returns to the device name.

Bluetooth Audio

Important

! Depending on the Bluetooth audio player con-

nected to this unit, the available operations

will be limited to the following two levels:

— A2DP profile (Advanced Audio Distribution

Profile): You can only playback songs on

your audio player.

— AVRCP profile (Audio/Video Remote Con-

trol Profile): You can perform playback,

pause playback, select songs, etc.

! Since there are a number of Bluetooth audio

players available on the market, available op-

erations will vary extensively. When operating

your player with this unit, refer to the instruc-

tion manual that came with your Bluetooth

audio player as well as this manual.

! Information related to a song (such as the

elapsed playing time, song title, song index,

etc.) cannot be displayed on this unit.

! As the signal from your cellular phone may

cause noise, avoid using it when you are lis-

tening to songs on your Bluetooth audio

player.

! When a call is in progress on the cellular

phone connected to this unit via Bluetooth

wireless technology, the sound of the

Bluetooth audio player connected to this unit

is muted.

! When the Bluetooth audio player is in use,

you cannot connect to a Bluetooth telephone

automatically.

! Playback continues even if you switch from

your Bluetooth audio player to another source

while listening to a song.