- ページ 9

CDプレーヤー Pioneer LaserDisc CLD-S370のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer LaserDisc CLD-S370 25 ページ。 Cd cdv ld player

ページを印刷する

lip

iL.

PLUG THE POWER

CORDS INTO AN AC OUTLET

Plug the AC power cords of the player, stereo amplifier and TV set into an AC outlet.

When the power cord of this unit is connected to an AC outlet, power is supplied to the unit's

internal memory (such as the last memory) even when the POWER switch is off (STANDBY).

Therefore, be sure to connect the power cord directly to a wall outlet. If the power cord is

connected to an outlet such as a switched outlet on an amplifier, the various memory contents

will be erased whenever the amplifier's power switch is turned off.

4mmmm

USING

TELEVISION

WITHOUT

AUDIO

AND

VIDEO

JACKS

Optional

RF modulator

VHF

television

antenna

RF antenna

cable

UHF

television

antenna

1. Detach the VHF antenna cable from the VHF antenna

terminal of your TV set, and connect the cable to the

VHF IN terminal of the RF modulator.

2. Connect the VHF OUT terminal of the RF modulator to

the VHF antenna terminal of your TV set.

3. Connect the socket (3-pin) of the RF modulator to the

VHF ADAPTER OUTPUT jacks.

NOTE:

Push the plug in firmly. If the plug is not properly inserted,

it may result in snow or noise on the screen.

When the sound from a LaserDisc or Compact Disc is

output through a television speaker it becomes monaural

50u_6 {,lhis is the same _or a stereo te_evisionl.

NOTES:

•

Stripepattemsmayapp

earwhenaLaserDiscisplayed

on a television. Move the antenna cable away from the

power cord to avoid this.

•

Be sure to turn off the power of this player when you

watch a IV broadcast.

fCONNECTING

"IV AND STEREO

AMPLIFIER

•

Connect the VIDEO OUT jack of the player to the video

input jack of the monitor television.

•

Connect the AUDIO OUT jacks to the stereo amplifier

AUX, CD, LD, VDP or other jacks, except the PHONO

input jacks. The television speakers can also be used

by connecting the television audio input jacks and the

player AUIDO OUT jacks. However, connection to a

stereo amplifier is recommended

to obtain superior

audio

playback

quality

for Compact

Discs

and

LaserDiscs.

Do not change

the television

antenna

and VCR

connections.

STHE

MARK

System control can be performed

when the player is

combined with an optional AV amplifier, which can_rovide

centralized control of Pioneer products with the [] mark.

Connect the VIDEO OUT jack of the player to the video

disc video input jack of the AV amplifier and connect the

AUDIO OUT jacks of the player to the audio input jacks of

the AV amplifier.

Connect the CONTROL

IN jack of the player to the

CONTROL

OUT jack of the

AV amplifier

using

commercially available cord with mini-plugs.

• For details concerning the connection and operation

methods, please refer to the operating instructions for

the AV amplifier.

ATTENUATOR

switch

: CLD-S370/CLD-S304

hen the television speakers are used, the sound may

e distorted. In this case, set the ATTENUATOR switch

o ON (CLD-S370) to reduce the distortion.

NORMAL/KARAOKE

switch

: OLD-S270

hen this switch is set to KARAOKE position, the Aut

ause functions.

AMhC-3 R F OUTPUT

TERMINAL

: CLD-S304

is terminal is for intended for use with AC-3 (Digital

U_li-AUd_O

Format)

components

p\anned

ior

future

release. With this terminal, you will be able to connect

/_C-3

RE err_9\k_\ets

and

sutro_r_

9_oces

-%Ors • a_,d

_31avback

laser discs formatted with Digital Mu_ti-Audio.

• You cannot playback with currently

available laser

discs, laser disc players, AV amplifiers, etc., with this

terminal.

• Do not connect this terminal to the

audio input terminals

ol norma\

stereo

or AV a_r_li{'_ers.