- ページ 17

CDプレーヤー Pioneer PD-TM3のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PD-TM3 24 ページ。 Multi-play compact disc player

ページを印刷する

TO PLAY ONLY DESIRED TRACKS/DISCS (Program Playback and Delete Program Playback)

Programming a pause

| To check the program contents

inserting @ pause in your program can be very useful when carrying

out recording. Press i instead of entering a track number.

"PA"

appears on the display panel.

For example, when recording on both sides of a cassette tape,

if you program a pause after the last track to be recorded on

the first side, program playback will pause at that point to allow

you to switch tape sides. To resume program playback after the

player enters pause mode, press Hl.

NOTES:

®@ A pause can be prograrmmed only when the program procedure

is performed under stop mode.

@ A pause cannot be programmed at the beginning of a program

{P-01), nor can two pauses be programmed one after the other.

A pause inserted in a program is counted as one step.

If a pause is programmed as the last step of a program, the

player will not enter the pause mode.

To clear all of the program contents

@®:

During stop mode, press a.

When the magazine is ejected, the program contents of the

ejected magazine will be cleared.

To erase a program

CLEAR

During program mode, press CLEAR.

The last program step is erased and the contents of the previous

program step are displayed.

NOTE:

Contents of a program ean be erased during playback as well.

However, tracks preceding the currently playing track cannot be

erased in this way.

During program mode, set the player to stop mode and press

CHECK. The program contents will be displayed in the programmed

order.

After confirming the last programm step, the display will show

"00-00: ".

DISC NUMBER,

TRACK NUMB!

1. During program mode, set the player to stop mode and press

CHECK

so that the program step to be corrected appears on

the display.

2. To correct the magazine No., enter the new magazine No. with

MAGAZINE. To correct the disc No., enter the new disc No

with the DISC number buttons.

To correct the track No., enter

the new track No. with the Digit buttons.

For example, the

programmed track No. 9 on the disc No. 1 in the magazine No

1 is changed to track No. 2 on the disc No. 2 in the magazine

No. 2, using MAGAZINE 2, DISC 2 and digit button 2

Repeat steps 1 and 2 to change other tracks as desired.

To change the track No. with Hé< << o7 i

mii, be sure to

press PROGRAM.

About 2 seconds have passed since ke

~<¢-4 OF Be

is pressed, the track No. to be changed is

automatically entered.