- ページ 11
CDプレーヤー Pioneer PDR-609のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDR-609 44 ページ。 Compact disc recorder
Pioneer PDR-609 にも： 取扱説明書 (44 ページ)
ページを印刷する
LINE
REC
PLAY
IN
OUT
L
R
R
L
R
L
R
L
MD/TAPE
OUTPUT
INPUT
REC
PLAY
L
R
Connecting up for analog
playback & recording
Before you start, make sure that all the components are
switched off and disconnected from the wall outlet.
Next, connect this unit to your amplifier/receiver using the
two sets of supplied audio leads—one set for playback, the
other for recording. On the rear panel of your amplifier find
an unused set of inputs/outputs for a tape/md recorder (check
the instruction manual that came with your amplifier if
you're unsure about which terminals to use).
Using this set up you can make recordings from any other
component connected to the amplifier, via the analog inputs
of this unit.
Connecting other Pioneer Î
components
If you are using a Pioneer amplifier or receiver that has this
feature, you can control this unit with the multi-remote
controller that came with your amplifier/receiver. The
advantage of this is that you can use a single remote control
to operate several components. Check the instruction manual
that came with your amplifier or receiver for more informa-
tion on using its remote as a multi-controller.
Use a commercially available cord with a mono mini-plug at
either end to connect the
CONTROL OUT
amplifier/receiver to the
CONTROL IN
Note: Make sure that at least one set of analog terminals is
connected to the amplifier when using Î control cords.
CONTROL
DIGITAL OUT
DIGITAL IN
OPTICAL
COAXIAL
OPTICAL
COAXIAL
IN
TEXT
L
R
OUT
CONTROL
terminal of the
terminal of this unit.
POWER-CORD CAUTION
Handle the power cord by the plug part. Do not pull out the
plug by tugging the cord, and never touch the power cord
when your hands are wet, as this could cause a short circuit or
electric shock. Do not place the unit, a piece of furniture, or
other object on the power cord or pinch the cord in any other
way. Never make a knot in the cord or tie it with other cords.
The power cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire or give
you an electric shock. Check the power cord once in a while.
When you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a replacement.
2 Connecting up
AC IN
11
En