- ページ 19

CDプレーヤー Pioneer PR-8210のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PR-8210 26 ページ。 Videodisc player
Pioneer PR-8210 にも：取扱説明書 (26 ページ), 補足サービスマニュアル (6 ページ)

ページを印刷する

AUTOMATIC

PICTURE

STOP

The player has a function called "automatic pic-

ture stop" which freezes the program

automati-

cally at the frame designated by a specially record-

ed code in the videodisc. The freeze frame occurs

when the player is in either normal play or slow

motion mode.

When

the automatic

picture stop has occurred,

simply press the

marked end of the PLAY/

PAUSE

key (or the PLAY key on the remote con-

trol unit) or the SLOW key to release the freeze

frame.

OPERATION WITH THE REMOTE CONTROL

UNIT

With the RU-8210 remote control unit, almost all

operations described up to now and many others

can

be controlled

from

the comfort

of your

viewing position. The remote control can be used

up to a distance of about twenty feet from the

player. Always point the front of the remote con-

trol unit toward the reception point on the player

before pressing one of the keys. Commands are

transmitted by an infrared beam and the remote

control

indicator just above the remote control

receiver lights to confirm that a command has been

received.

NOTES:

e Remote control commands may not reach the

player if there are obstacles between the re-

mote control unit and the player or if the play-

er is placed at an angle to the remote control

unit.

e Do not place the appliances that project in-

frared light near the player or use other in-

frared type remote control units as these could

be sensed as commands by the player. Also be

sure other appliances controlled by infrared

type remote controls are out of the effective

range of the RU-8210 remote control unit.

e The battery life differs greatly depending on

how often the RU-8210 remote control unit

is used.

As the batteries become

weaker, the

effective

distance

of the unit

will become

shorter. Replace the batteries when the player

does not execute

a command even though the

indicator on

the remote

control unit lights

when a key is pressed or when the effective dis-

tance becomes too short.

e The remote control unit will not activate when

the CONTROL

terminal on the rear panel is

plugged in.