- ページ 30

CDプレーヤー Pioneer X-CM56DのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer X-CM56D 38 ページ。 Cd receiver system

ページを印刷する

Bluetooth

Pairing and connection using NFC

NFC stands for Near Field Communication. If a NFC-

equipped smartphone is placed close to the unit, Bluetooth

pairing and connection can easily be established. For

details, refer to the user manual for the NFC-equipped

device.

Note

• Supported OS: Android 4.1 and above

• This may not operate properly, depending on the

smartphone or tablet device.

• This unit automatically turns on if an NFC-equipped

smartphone is held over the NFC area when BT

STANDBY is set to ON.

• The N Mark is a trademark or registered trademark of

NFC Forum, Inc. in the United States and in other

countries.

• Android is a trademark of Google Inc.

Hold the device to be connected over the

NFC area on the front panel of the unit.

When an NFC-equipped smartphone is detected, the input

automatically switches to Bluetooth .

Pairing automatically begins.

When an NFC-equipped smartphone is detected, Pairing

displays on the front panel display.

• Do not move the NFC-equipped smartphone until a

response such as message display can be confirmed

on the device. Remove the device after a response is

confirmed on the device.

• If a connection does not start, change the position to

hold the NFC-equipped smartphone over this unit.

Once connection with the NFC-equipped

smartphone is completed, the device name is

displayed on the front panel display of this unit.

Start playback of the music from the NFC-

equipped smartphone.

Audio playback

Note

• Only one device can be connected at a time.

• NFC can also be used to quickly cancel a Bluetooth

connection. If you perform Step 1 using a NFC-

equipped smartphone that is already connected via

Bluetooth , the connected will be cancelled.

• If another NFC-equipped smartphone is held over the

NFC area, this unit connects to the device via

Bluetooth. The connection with the previously

connected device is terminated.

Radio wave caution

This unit uses a 2.4 GHz radio wave frequency, which is a

band used by other wireless systems (see list below). To

prevent noise or interrupted communication, do not use this

unit nearby such devices, or make sure these devices are

switched off during use.

• Cordless phones

• Cordless facsimiles

• Microwave ovens

• Wireless LAN devices (IEEE802.11b/g)

• Wireless AV equipment

• Wireless controllers for game systems

• Microwave-based health aids

• Some baby monitors

Other, less common, equipment that may operate on the

same frequency:

• Anti-theft systems

• Amateur radio stations (HAM)

• Warehouse logistic management systems

• Discrimination systems for train or emergency vehicles

Note

• In the event noise appears in your television image,

there is the possibility that a Bluetooth wireless

technology enabled device or this unit (including

products supported by this unit) are causing signal

interference with the antenna input connector of your

television, video, satellite tuner, etc. In this event,

increase the distance between the antenna input

connector and the Bluetooth wireless technology

enabled device or this unit (including products

supported by this unit).

• If there is something obstructing the path between this

unit (including devices supported by this unit) and the

device equipped with Bluetooth wireless technology

(such as a metal door, concrete wall, or insulation

containing tinfoil), you may need to change the location

of your system to prevent signal noise and interruptions.