- ページ 12

DVDプレーヤー Pioneer 490V-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer 490V-S 48 ページ。 Pioneer operating instruction dvd player dv-393-s dv-490v-s

Connecting up

Connect the VIDEO OUT and AUDIO

OUT L/R jacks to a set of A/V inputs on your

TV.

Use the supplied audio/video cable,

connecting the red and white plugs to the

audio outputs and the yellow plug to the video

output. Make sure you match up the left and

right audio outputs with their corresponding

inputs for correct stereo sound.

See below if you want to use a component or

S-video cable for the video connection.

Connect the supplied AC power cable to

the AC IN inlet, then plug into a power

outlet.

Note

• Before unplugging the player from the

power outlet, make sure you first switch it

into standby using either the front panel

STANDBY/ON button, or the remote

control, and wait of the -OFF- message to

disappear from the player's display.

• For the above reasons, do not plug this

player into a switched power supply found

on some amplifiers and AV receivers.

Connecting using a SCART AV

cable

A SCART-type AV connector is provided for

connection to a TV or AV receiver. The video

output is switchable between ordinary

composite and RGB. See AV Connector Out on

page 36 for how to set it.

The SCART AV connector also outputs analog

audio, so there is no need to also connect the

AUDIO OUT L/R jacks.

SCART

AUDIO OUT

VIDEO OUT

NT VIDEO OUT

Use a SCART cable (not supplied) to

connect the AV CONNECTOR (RGB) output

to a SCART AV input on your TV (or AV

receiver).

AV CONNECTOR (RGB) TV/AV Receiver