- ページ 34
DVDプレーヤー Pioneer 490V-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer 490V-S 48 ページ。 Pioneer operating instruction dvd player dv-393-s dv-490v-s
ページを印刷する
07
Initial Settings menu
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press HOME MENU and select 'Initial
Settings'.
2
Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Note
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
Digital Audio Out settings
Setting
Digital Out
Dolby Digital Out
34
En
Initial Settings
Option
On
Off
Dolby Digital
Dolby Digital > PCM
• The Digital Audio Out settings only need to
be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it's compatible with.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
• The HDMI Out, HDMI Resolution and
HDMI Color settings only need to be set if
you connected this player to an HDMI-
compatible component using the HDMI
connector.
• The Digital Audio Out, Component Out
and AV Connector Out settings cannot be
set if the player is connected to an HDMI-
compatible component using the HDMI
connector.
What it means
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.