- ページ 38
DVDプレーヤー Pioneer 490V-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer 490V-S 48 ページ。 Pioneer operating instruction dvd player dv-393-s dv-490v-s
ページを印刷する
07
Initial Settings menu
Parental Lock
• Default level: Off; Default password: none;
Default Country/Area code: us (2119)
To give you some control over what your
children watch on your DVD player, some DVD-
Video discs feature a Parental Lock level. If
your player is set to a lower level than the disc,
the disc won't play.
Some discs also support the Country/Area
Code feature. The player does not play certain
scenes on these discs, depending on the
Country/Area Code you set.
Note
• Not all discs use Parental Lock, and will
play without requiring the password first.
• If you forget your password, you'll need to
reset the player to register a new password
(see Resetting the player on page 42).
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country code.
1
Select 'Options', then 'Password'.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
2
Use the number buttons to enter a 4-
digit password.
The numbers you enter show up as asterisks
(*) on-screen.
3
Press ENTER to register the password.
You will return to the Options menu screen.
38
En
Parental Lock
Password
DivX VOD
Level Change
Country Code
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
Select 'Password Change'.
2
Use the number buttons to enter your
existing password, then press ENTER.
3
Enter a new password and press ENTER.
This registers the new password and you will
return to the Options menu screen.
Setting/changing the Parental Lock
1
Select 'Level Change'.
2
Use number buttons to enter your
password, then press ENTER.
3
Select a new level and press ENTER.
• Press
(cursor left) repeatedly to lock
more levels (more discs will require the
password); press
unlock levels. You can't lock level 1.
This sets the new level and you will return to the
Options menu screen.
Setting/changing the Country/Area
code
You can find the Country/Area code list on
page 46.
1
Select 'Country Code'.
2
Use number buttons to enter your
password, then press ENTER.
3
Select a Country/Area code and press
ENTER.
There are two ways you can do this:
• Select by code letter: Use
down) to change the Country/Area code.
• Select by code number: Press
right) then use the number buttons to enter
the 4-digit Country/Area code.
(cursor right) to
(cursor up/
(cursor