- ページ 32
DVDプレーヤー Pioneer DV-280-SのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer DV-280-S 42 ページ。 Pioneer dvd player dv-280-s dv-285-s
ページを印刷する
07
Initial Settings menu
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and
video output settings, parental lock settings,
and display settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1
Press HOME MENU and select 'Initial
Settings'.
2
Use the cursor buttons and ENTER to
select the setting and option you want to
set.
All the settings and options are explained on
the following pages.
Digital Audio Out settings
Setting
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
32
En
Initial Settings
Option
On
Off
Dolby Digital
Dolby Digital > PCM
DTS
Off
96kHz > 48kHz
96kHz
Note
• In the table below, the default setting is
shown in bold: other settings are shown in
italics.
• The Digital Audio Out settings only need to
be set if you have connected the digital
output of this player to an AV receiver, or
other equipment.
• Check the operating instructions supplied
with your other equipment to see which
digital audio formats it's compatible with.
• Some settings, such as TV Screen, Audio
Language and Subtitle Language may be
overridden by the DVD disc. Often these
settings can also be made from the DVD
disc menu.
What it means
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital encoded digital audio is output when playing a
Dolby Digital DVD disc.
Dolby Digital audio is converted to PCM audio before being
output.
DTS encoded digital audio is output when playing a DTS disc.
(Noise will be output if your amplifier/receiver is not compatible
with DTS audio.)
No digital audio is output when playing a DTS disc.
96kHz digital audio is converted to 48kHz for digital output.
96kHz digital audio is output as is at 96kHz.