ページを印刷する
Getting started
Chapter 4
Getting started
Switching on
After making sure that everything is connected properly and that the player is plugged in, press
STANDBY/ON on the front panel or remote control to switch the player on.
Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.
STANDBY/ON
S ANDBY ON
DV-2750
FAQ
• My DVD player switches on but there is nothing displayed on my TV.
Make sure that the TV is set to the correct video input (not a TV channel). For example, if you
connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.
Note
• This player features a screen saver and an auto power off function. If the player is stopped and
no button is pressed for around five minutes, the screen saver starts. If the disc tray is closed
but no disc is playing and no control is pressed for about 30 minutes, the player automatically
goes into standby.
Using the on-screen displays
For ease of use, this player makes extensive use of graphical on-screen displays (OSDs).
All the screens are navigated in basically the same way, using the cursor buttons (
change the highlighted item and pressing ENTER to select it.
EN ER
ENTER
HOME
DV-2750
RE URN
RE URN
) to
TOP MENU
MENU
OPEN/
CLOSE
N E
HOME
MENU
RETURN
Button
What it does
HOME MENU
Display/exit the on-screen display.
Changes the highlighted menu item.
ENTER
Selects the highlighted menu item (both ENTER buttons on the remote work
in exactly the same way).
RETURN
Returns to the main menu without saving changes.
Note
• From here on in this manual, the word 'select' generally means use the cursor buttons to
highlight an item on-screen, then press ENTER.
Setting up the player for your TV
If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented
correctly. If you have a conevntional (4:3) TV, you can leave the player on the default setting and move
on to the next section.
1
Press HOME MENU and select 'Initial
Settings'.
2
Select 'TV Screen' from the 'Video Output'
settings.
3
If you have a widescreen (16:9) TV, select '16:9 (Wide)'.
If you have a conventional (4:3) TV, you can change the setting from 4:3 (Letter Box) to 4:3 (Pan &
Scan) if you prefer. See Video Output settings on page 18 for more details.
4
Press HOME MENU to exit the menu screen.
Setting the language of this player's on-screen displays
This sets the language of this system's on-screen displays.
1
Press HOME MENU and select 'Initial
Settings'.
2
Select 'OSD Language' from the 'Display'
settings.
3
Select a language.
The on-screen language will change according to your selection.
Initial Settings
Initial Settings
Dig tal Audio Out
4:3 (Letter Box)
TV Screen
Video Output
4:3 (Pan&Scan)
Component Out
Language
16:9 (Wide)
S Video Out
Display
Options
Initial Settings
Ini ial Set ings
Digital Audio Out
OSD Language
English
Video Ou put
On Screen Display
r nçais
Language
Angle ndicator
Deutsch
Di play
Itali no
Op ions
Español
10
En