- ページ 2

スピーカーシステム Pioneer Elite PDP-S23-LRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer Elite PDP-S23-LR 19 ページ。 Elite
Pioneer Elite PDP-S23-LR にも：サービスマニュアル (10 ページ)

ページを印刷する

English

Thank you for buying this Pioneer product.

Please read through these operating instructions before

using your speaker system so you will know how to make

the most of its performance. After you have finished reading

the instructions, put them away in a safe place for future

reference.

WARNING:

Handling the power cord on this product or cords

associated with accessories sold with the product will

expoes you to lesd, a chemical known to the State of

California and other governmental entities to cause cancer

and birth defects or other reproductive harm.

Wash hands after handling.

BEFORE USE

÷ The nominal impedance of this speaker system is 8 ohms.

÷ In order to prevent damage to the speaker system

resulting from input overload, please observe the

following precautions:

÷ Do not supply power to the speaker system in

excess of the maximum permissable input. This

can result in damage or a possible fire hazard.

÷ When connecting or disconnecting pin-plugs, be

sure that amplifier power is OFF.

÷ When using a graphic equalizer to emphasize loud

sounds of a high frequency range, do not use

excessive amplifier volume.

÷ Do not force a low-powered amplifier to produce a

loud volume of sound (the amplifier's harmonic

distortion will be increased, and you may damage

the speaker).

÷ Please handle the speakers with sufficient care, as

the grille net and the cabinet can become damaged

or broken when they are subjected to strong external

impacts.

÷ Placing a CRT computer screen or CRT monitor near to

the speakers may result in interference or color distortion.

If this happens, distance the monitor from the speakers.

Notes on Installation Work:

This product is marketed assuming that it is installed by

qualified personnel with enough skill and competence.

Always have an installation specialist or your dealer install

and set up the product.

PIONEER cannot assume liabilities for damage caused

by mistake in installation or mounting, misuse,

modification or a natural disaster.

CHECKING THE ACCESSORIES

7 Speaker cable x 2

7 Speaker mounting fittings (Used when installing the

speakers flush with the display)

Bracket for flush mounting (RIGHT) x 2

Bracket for flush mounting (LEFT) x 2

Padding strip x 2

7 Speaker mounting fittings (used when mounting

the speaker so as to allow angle adjustment)

Bracket for air

mounting (R) x 1

Bracket for air

mounting (L) x 1

Covers (upper) x 2

Covers (lower) x 2

7 Speakers mounting screws

7 Operating Instructions

NOTE:

÷ Always use the accessory mounting fittings for

installation.

÷ When screws other than those enclosed as accessories

are used to install the speakers, the speakers may drop

off or accidents may be caused. Always use the screws

enclosed as accessories.

Speakers are designed to allow the two methods of

installation shown, in accordance with the user's preference:

1. Flush: Speakers are mounted flat against the sides of

the display, and fixed in position (non-adjustable).

2. Air: Speakers are mounted apart from the sides of the

display, so as to allow adjustment of their angles.

Flush

See the description below for details of the installation.

NOTE:

÷ If you install the speakers flush /air, you cannot use the

buttons on the right side of the display. Please use the

remote control.

x 12

Air