- ページ 6

スピーカーシステム Pioneer Elite S-IW571LのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer Elite S-IW571L 17 ページ。 In-wall speaker
Pioneer Elite S-IW571L にも：パンフレット (1 ページ), パンフレット＆スペック (8 ページ), パンフレット (3 ページ), 取扱説明書 (17 ページ)

ページを印刷する

1. Specifications

13 Adjust the setting of the treble control as

necessary.

• The standard setting is 0.

• The treble switch located in the front of the speaker

has three positions to choose from, +/0/–.

14 Attach the butyl rubber tapes on the inside of the

grille.

Attach the eight butyl rubber tapes

to each grille, lining up the butyl

rubber tapes to the marks on the

inside of the grille.

Then peel off the protective paper.

15 Attach the grille to the speaker.

The grille is designed with a specific mounting

orientation. Gently push the grille onto the speaker, lining

up the corners of the grille to the grooves in the speaker.

Then line up the entire grille to the grooves in the speaker

and attach the grille by pressing in on the edges.

Orientate the grille so that the

edge marked in blue is located

at the top of the speaker.

Make sure to press on the edges.

Pressing on the middle of the

grille will cause it to be deformed.

• Once you have pushed it in, make sure you press it

firmly against the speaker so that the grille doesn't

fall off and cause an accident.

• To remove the grille, use the supplied tool to hook

into the holes located near the corners and pull the

grille out. When doing this, make sure to pull all four

corners out evenly. Forcing the grille out from one

corner alone will cause the grille to be deformed.

Connections

Connecting to an amplifier

Make sure you have read the connection instructions in

the manual supplied with the amplifier and that all

equipment is turned off before making any connections.

• When using a set of speakers connected to an

amplifier, you won't be able to obtain the correct

stereo effect if the polarity (+, –) of one of the

speakers (left or right) is reversed.