- ページ 2

スピーカーシステム Pioneer Elite S-IW871-LRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer Elite S-IW871-LR 17 ページ。 In-wall speaker
Pioneer Elite S-IW871-LR にも：パンフレット (1 ページ), パンフレット＆スペック (8 ページ), パンフレット (3 ページ)

ページを印刷する

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have

finished reading the instructions, put them away in a safe place for future reference.

Introduction

This speaker system is designed for in-wall installation.

The design features provide for a wide range of

placement and listening position options.

This speaker system is designed with CST (Coherent

Source Transducer) technology to assure excellent

sound quality. CST sound delivery is extremely smooth

and coherent. All sound - direct and reflected - arrives at

the listening position with matched timbre.

This speaker system is also paintable so that they may be

matched to your room decor.

Before you start

• The nominal impedance of this speaker system is

6 Ω. Connect the speaker system to an amplifier

capable of driving an impedance of at least 6 Ω.

This product incorporates auto-resetting overload

protection technology to help avoid damage to the

speakers. However, please observe the following

precautions:

• Do not supply amplification power to the speaker

system in excess of the maximum permissible

input, which could damage the speaker and cause

a hazard from overheating.

• If using a graphic equalizer to boost sounds in the

high-frequency range, do not use excessive

amplifier volume.

• Do not try to force a low-powered amplifier to

produce high sound levels as the amplifier's

harmonic distortion will be increased, and you may

damage the speaker.

Caution: installation

• Pioneer is not responsible for any accidents or

damage that result from improper installation,

misuse, modification of the product, or natural

disasters.

• This speaker system must be installed by a qualified

technician as it involves such tasks as selecting a

location for installation, drilling holes in walls/ceiling,

wiring, and painting. Have the installer carefully

follow the installation instructions.

• The installation technician must follow professional

installation techniques to protect the speaker system

against falling.

• When installing the speakers, make sure that the

wall/ceiling is strong enough to support the

speakers.

• Improper installation of the speakers could cause

them to fall and cause damage or injuries to persons

nearby.

• Switch off and unplug your AV equipment and

consult the instructions when connecting up

components. Make sure you use the correct

connecting cables.

• Keep magnetic objects such as screwdrivers or steel

parts away from the tweeter and woofer speakers.

Since the speakers use strong magnets, the objects

may be attracted, causing injury or damaging the

diaphragm.

• Do not install the speakers where they will be in direct

sunlight, and avoid positioning them near heaters

and air conditioners. This may cause warping and

discoloration of the speaker and damage to the

speakers.

• This speaker system is designed for home use only.

To avoid electric shock hazard, do not place them

outside, or in an overly humid area.

Caution: in use

• If the speakers stop emitting sound after receiving

too large an input signal, turn down the volume

control on the amplifier and wait a few seconds. The

protection feature will be reset automatically.

For U.S. model

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product will expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

Wash hands after handling

D36-P4_A_En