ページを印刷する
English
Thank you for buying this Pioneer product.
Please read through these operating instructions before using
your speaker system so you will know how to make the
most of its performance. After you have finished reading the
instructions, put them away in a safe place for future
reference.
WARNING:
Handling the cord on this product or cords
associated with accessories sold with the product will expose
you to lead, a chemical known to the State of California and
other governmental entities to cause cancer and birth defects
or other reproductive harm. Wash hands after handling.
CAUTION
This product is designed exclusively for use with the
PDP-4330HD,PDP-433HDE,PDP-433HDG Pioneer plasma
display.
CAUTION
AFTER THE SPEAKER HAS BEEN INSTALLED, DO
NOT HOLD IT OR USE IT FOR SUPPORT WHEN
MOVING THE DISPLAY. REMOVE THE SPEAKER
BEFORE MOVING.
BEFORE USE
The nominal impedance of this speaker system is 8 ohms.
÷ In order to prevent damage to the speaker system
resulting from input overload, please observe the
following precautions:
÷ Do not supply power to the speaker system in
excess of the maximum permissable input. This
can result in damage or a possible fire hazard.
÷ When connecting or disconnecting pin-plugs, be
sure that amplifier power is OFF.
÷ When using a graphic equalizer to emphasize
loud sounds of a high frequency range, do not
use excessive amplifier volume.
÷ Do not force a low-powered amplifier to produce
a loud volume of sound (the amplifier's harmonic
distortion will be increased, and you may
damage the speaker).
÷ Please handle the speakers with sufficient care, as
the grille net and the cabinet can become dam-
aged or broken when they are subjected to strong
external impacts.
Placing a CRT computer screen or CRT monitor near to the
speakers may result in interference or color distortion. If this
happens, distance the monitor from the speakers.
Notes on Installation Work:
This product is marketed assuming that it is installed
by qualified personnel with enough skill and compe-
tence. Always have an installation specialist or your
dealer install and set up the product.
PIONEER cannot assume liabilities for damage
caused by mistake in installation or mounting,
misuse, modification or a natural disaster.
2
CHECKING THE ACCESSORIES
7 Speaker cable x 2
7 Wire clamp x 2
7 Speaker mounting fittings x 2
7 Speaker mounting bolts
• Flat countersunk head screw x 2
• Hexagon socket head screw x 2
7 Mounting tool (Hex wrench)
7 Operating instructions
NOTE:
• Always use the accessory mounting fittings for
installation.
• When screws other than those enclosed as
accessories are used to install the speakers, the
speakers may drop off or accidents may be caused.
Always use the screws enclosed as accessories.