- ページ 5

スピーカーシステム Pioneer PDP-S20-LRのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDP-S20-LR 33 ページ。

ページを印刷する

• Organize cables together using the

speed clamps provided with the

plasma display.

Insert 1 into an appropriate hole on the rear of the unit, then

snap 2 into the back of 1 to fix the clamp.

Speed clamps are designed to be difficult to undo once in

place. Please attach carefully.

To remove speed clamps

Using pliers, twist the clamp 90° and pull it outward.

In some cases the clamp may have deteriorated over time

and may be damaged when removed.

To attach the speed clamps to the main unit

Connect the speed clamps using the 1 hole marked with •

below, depending on the situation.

CABINET MAINTENANCE

÷ Use a polishing cloth or dry cloth to wipe off dust and

dirt.

÷ When the cabinet is very dirty, wipe with a soft cloth

moistened with water-diluted cleanser; then wipe again

with a dry cloth. Do not use furniture wax or cleaners.

They may damage the surface of the cabinet.

÷ Never use thinner, benzine, insecticide sprays and other

chemicals on or near the cabinets, since these will cor-

rode the surfaces.

÷ When a chemical cloth is used, read the cautions for the

chemical cloth carefully.

SPECIFICATIONS

Cabinet : Bass-reflex type

Used speakers (three-way system) :

Woofer (for low tones) ............................ Oval cone type

Tweeter (for high tones) ....................... 2 cm dome type

Super Tweeter (for high tones) ......... 2 cm ceramic type

Nominal impedance ..................................................... 8 Ω

Frequency Range ..................................... 60 to 20,000 Hz

Sensitivity ................................ 82 dB/W (at 1 m distance)

Permissible input :

Max. input ............................................................... 13 W

Rated input .............................................................. 4 W

Crossover frequency ................................................ 2 kHz

External Dimensions ....... 108 (W) x 652 (H) x 65 (D) mm

Weight ..................................................................... 1.7 kg

Accessory parts (for 2 speakers)

.............................................................. Speaker cable x 2

........................................................ Screw (M5 x 10) x 12

........................................... Holder for flush mounting x 4

..................................... Holder for set back mounting x 4

................................................ Operating Instructions x 1

NOTE:

Specifications and design subject to possible modification

without notice, due to improvements.

English

Published by Pioneer Corporation.