- ページ 5

スピーカーシステム Pioneer PDP-S50のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDP-S50 15 ページ。
Pioneer PDP-S50 にも：サービスマニュアル (7 ページ)

ページを印刷する

CONNECTION TO A PLASMA DISPLAY

CONNECTING THE SPEAKERS

1. Pass the speaker cables through the

hole in the speaker mounting

bracket.

2. Connect the speaker cables to the

speaker.

3. Press the speaker cables into the

groove of the bracket.

4. Connect the speaker cables to the

display.

Connecting your Speaker Cables

(to the speaker)

Black ·

White

Push the lever, insert the end of the speaker cable

into the hole, and release the lever.

Pay attention to the polarity of the speaker

terminals when making connections. (The gray line

represents the red terminal)

NOTE:

• Press the lever and insert the end of

the cable.

• When you release the lever, it clamps

onto the speaker cable.

Caution

• Be sure to turn the connected devices off and remove

the power cord from the wall outlet beforehand when

changing the connection or installation method.

• If you insert the speaker cable too far so

that the insulation is touching the speaker

terminal, you may not get any sound.

Please insert it with showing the copper

wire.

Red ª

Gray line

• Check if the end of the speaker cables are securely

• If there is a short in the

• Incorrect connections of the speaker cable to the right

• Bundle the code without pulling the cord.

Speaker Cable

Groove

Connecting your Speaker Cables

(to the display)

Connect the cables correctly with respect to the

polarity of the Plasma Display and the speaker

terminals, that is, ª cable to ª terminals and ·

cable to · terminals. To do so, connect the cable

with the gray line to the ª terminals and the white

cable to the · terminals.

White

Gray line

Red

Black

connected to the terminals by slightly tugging on the

cable after making connections. Loose connections

may result in sound dropouts or noise.

and

exposed lead wire, excessive load may be applied to

the Plasma Display, resulting in interrupted operation or

malfunction.

or left of the Plasma Display terminals with respect to

the polarity may result in insufficient stereo sound

effects, delivering poor bass sounds or unstable sound

image.

English

Speaker Terminal

Gray line

Red

cables caused by an