- ページ 39

スピーカーシステム Pioneer PDSP-1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer PDSP-1 44 ページ。 Pioneer digital sound projector operating instructions pdsp-1

ページを印刷する

Troubleshooting

Problems

with Use or

Can't recharge remote control unit

Operation?

Remote control unit doesn't work

Remote control unit doesn't operate connected Pioneer DVD recorder

Touch panel menus don't change

If the unit does not operate normally due to external effects (such as

static electricity)

Resetting the Remote Control Unit

Use a Phillips screwdriver

to remove the screw on

the back panel of the

remote control unit.

Table of Remote Control Unit Menu

Displays

Check the recharge indicator in the upper right corner of the remote

control unit's touch panel to confirm whether the remote control unit is

sitting on the recharger and recharging correctly.

If the remote control unit's battery won't hold a sufficient charge to allow

use of the remote control unit even after proper recharging, the unit's

Lithium-ion battery may require replacing. In this event, consult your

authorized Pioneer service center. The remote control unit's Lithium-ion

battery cannot be purchased at any location other than an authorized

Pioneer service center.

Check that the main power switch is turned on, the power cord is con-

nected securely, and the front panel's POWER ON (Blue) or STANDBY

(Red) indicator is lighted.

Check the remote control unit's remaining charge indicator to confirm that

the remote control unit's battery is properly recharged.

You may be using the remote control too far from the sensor (Try moving

closer to the digital sound projector).

Remote operation may become unreliable if direct sunlight, a fluorescent

lamp, or other strong light source is striking the remote control sensor on

the front panel.

Depending on the model, some functions may not be supported.

If the remote control menu screens do not change, try using the following

procedure to reset the remote control unit. Resetting the remote control

unit will not erase recorded settings.

Disconnect the power plug from the outlet and insert again to return to

normal operating conditions.

Remove the panel.

Index

Use a narrow pointed

object to press the RESET

button.

P16

P10

P14

P11