- ページ 2
スピーカーシステム Pioneer S-VSL6のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Pioneer S-VSL6 13 ページ。 Speaker system
ページを印刷するConfirm your Accessories
• Speaker wire
• Acoustic control material
• Operating Instructions
Regarding Installation
The playback sound from the speaker system may change
sensitively as a result of influences from the conditions of the
listening room. When installing the speakers, consider the
location carefully in order to get optimum results from your
installation.
• For a suspended installation, fasten a cord or chain to the
metal fixture on the rear panel and attach securely to a
pillar or wall. Be sure the pillar or wall used has sufficient
strength to support the speaker's weight. After installing
the speaker, confirm that it is supported securely and will
not fall.
• If the speaker falls it may be damaged.
• Do not hang the speaker directly from the metal fixture on
the rear panel. To prevent the speaker from falling, always
attach a cord or chain to the metal fixture when suspending
the speaker from a wall or pillar.
<Rear Panel of Speaker>
Mounting
fixture
Always attach a cord or chain
to the mounting fixture when
using the speaker in a
suspended installation.
2
En
Pioneer disclaims all responsibility for any
losses or damage resulting from improper
assembly, installation, insufficient strength
of the installation materials, misuse, or
natural disasters.
• This speaker system weighs about 11 kilograms. Floor
installations should be on a flat and stable floor surface;
the speaker should be installed away from walls, as shown
in the accompanying illustration.
The distance between the speaker and the wall behind it
can be changed to adjust the bass emphasis. Adjust the
distance so that no audible difference in tone is heard from
left and right speakers.
• The most natural listening experience will be produced
when the listening position is midway between and an
equal distance from the two speakers, as shown. Adjust the
speaker wire to the same length from both speakers.
Cable or chain
50cm
20cm