- ページ 14
モニター Pioneer AVD-W8000のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVD-W8000 18 ページ。 Color lcd rear display
ページを印刷するAVD-W8000_Cgb.fm Page 14 Tuesday, August 22, 2000 4:54 PM
(
1
2
3
7
8
4
5
6
Receive stereo audio, as from a VCR or
DVD.
Receives video, as from a VCR or DVD.
Receives S-VIDEO OUTPUT video when
the display is teamed up with AV gear
supporting an S-VIDEO OUTPUT
terminal.
Receive stereo audio, as from a VCR or
DVD.
Receives video, as from a VCR or DVD.
Receives S-VIDEO OUTPUT video when
the display is teamed up with AV gear
supporting an S-VIDEO OUTPUT
terminal.
9
11
12
10
Power cable
Resets the display microprocessor. Press
with the tip of a ballpoint pen or similar
object.
Connects to the display unit.
Receives the power cable supplied.
Connects to other AV gear. Video
selected with this display is directed to
this terminal.
Connect to other AV gear. Audio selected
with this display is directed to these
terminals.
Hide-away Unit
• Cords for this product and those for other products
may be different colors even if they have the same
function. When connecting this product to another
product, refer to the supplied installation manuals
of both products and connect cords that have the
same function.
• The red and yellow leads should be connected to
the opposite side of the fusebox terminals from the
battery.
Power cable
15 cm
Black
To vehicle (metal) body.
Fuse resistor
To the electric terminal controlled by the
Red
ignition switch (12 V DC) ON/OFF.
Do not connect this lead to power source
terninals to which power is continuously
Fuseholder (4 A)
supplied. If the lead is connected to such
terminals, the battery may be drained.
Yellow
To the terminal always supplied with power
regardless of ignition switch position.
• When replacing the fuse, be sure to use
only a fuse of the rating prescribed on
the fuse holder.
Light green
Used to detect the ON/OFF status of the
parking brake. This lead must be connected
Parking brake switch
to the power supply side of the parking brake
Power supply side
switch.
Ground side
• The position of the parking brake switch
Clamp the parking
depends on the vehicle model. For
brake switch power
details, consult the vehicle owner's
supply side lead.
manual or dealer.
Clamp firmly
with needle-
nosed pliers.