- ページ 21

モニター Pioneer AVH-189DVDのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Pioneer AVH-189DVD 47 ページ。 Monitors rds av receivers

ページを印刷する

AUX source

The image is displayed on the screen.

Setting the video signal

When you connect this product to an AUX equipment, select the

suitable video signal setting.

p You can operate this function only for the video signal input

into the AUX input.

1 Display the "Video Setup" screen.

2 Touch [Video Signal Setting].

3 Touch [AUX].

4 Touch the item you want to set.

The following items are available:

Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.

System settings

Displaying the "System" set-

ting screen

1 Press

2 Touch

, and then

The "System" setting screen appears.

Setting the steering wheel

control

You can set the steering wheel control on the display via a wired

remote cable.

 Power cord on page 31

p This setting is available only when you stop your vehicle in a

safe place and apply the handbrake.

p This setting is available when turn all the sources off.

This setting is required for using the steering wheel remote

control function.

p You can set a function key to more than one steering wheel

key.

p You can set only one function key to a steering wheel key.

p If you make a mistake after connecting this product with the

supplied wired remote cable, please reset it.

p If this function does not work correctly, contact your dealer

or an authorised Pioneer Service Station.

p When you start to set, all the default key settings is automati-

cally cleared.

For steering wheel control adapter

for Pioneer users

1 Display the "System" setting screen.

 Displaying the "System" setting screen on page 21

2 Touch [Steering Wheel Control].

3 Touch [With Adapter].

4 Touch [OK].

Registering function to each key

manually

1 Display the "System" setting screen.

 Displaying the "System" setting screen on page 21

2 Touch [Steering Wheel Control].

3 Touch [No Adapter].

4 Touch the item to select the brand of your

vehicle.

5 Touch the item to set.

Follow the on-screen instructions to register the function setting.

 If you touch [Clear], all the settings is cleared.

Activating the Bluetooth audio

source

289BT

1 Display the "System" setting screen.

 Displaying the "System" setting screen on page 21

2 Touch [AV Source Settings].

3 Touch [Bluetooth Audio] to switch "On"

(default) or "Off".

Setting the ever scroll

When "Ever Scroll" is set to "On", the recorded text information

scrolls continuously in the display while the vehicle is stopped.

1 Display the "System" setting screen.

 Displaying the "System" setting screen on page 21

2 Touch [Ever Scroll] to switch "On" or "Off"

(default).

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required

for utilising the rear view camera function. (For details, consult

your dealer.)

Rear view camera

This product features a function that automatically switches to

the full-screen image of the rear view camera installed on your

vehicle, when the gearstick is in the REVERSE (R) position.

Camera for Rear View mode

Rear View can be displayed at all times. Please note that with

this setting, the camera image is not resized to fit, and that a

portion of what is seen by the camera is not viewable.