- ページ 4

食器洗い機 Ariston HDA110のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston HDA110 20 ページ。 Built-in dishwasher

ページを印刷する

HOW TO OPERATE YOUR DISHWASHER

STEP 1.

Load your dishwasher with dishes, silverware,

pots, pans, bowls, etc., according to the Loading section.

STEP 2.

Add detergent to the detergent dispenser.

Make sure the Cycle Indicator Dial is at OFF position

before adding detergent. (See Detergent Guide).

Use rinse aid agent to help prevent spotting. Occasionally

check to insure that rinse agent container is at least half

full. (See How to Use a Rinse Agent section).

STEP 3.

Select drying option.

DRYING HEAT ON.

Turns the

drying heater on for fast drying.

DRYING HEAT OFF.

Turns the

drying heater off to save energy.

The dishes will dry naturally over

a longer period such as overnight.

If you need your dishes sooner, open

complete to reduce the natural drying time.

Use of this option reduces the electrical energy

used by this model approximately IO~o for the

NORMAL WASH cycle.

STEP 4.

Select the wash cycle and start the dishwasher.

(See Cycle Selection Hint;).

If your dishwasher drains into a food waste disposer,

operate the disposer until it is empty before starting

the dishwasher.

To obtain the benefits of a complete cycle,

do not turn the dial any

be careful that you

farther than necessary

to start the dishwasher.

For NORMAL WASH cycle:

a. Push selected cycle button.

b. Latch the door.

c. Slowly turn Cycle Indicator

Dial to ON position to start

the cycle. You will hear

the motor start. There is

a time delay between the start-up and the water

fill so you will not hear any wash action right away.

DRYING

HEAT ON

For WATER SAVER cycle:

Be sure door is unlatched.

b. Slowly turn the Cycle

Indicator Dial to the

DRYING

WATER SAVER position.

HEAT OFF

Latch door to start the cycle.

For RINSE & HOLD cycle:

Be sure door is unlatched.

b. Select DRYING HEAT

OFF drying option.

c. Slowly turn the Cycle

Indicator Dial to the

RINSE & HOLD position.

d. Latch the door to start the cycle.

For DRY/ PLATE WARMER cycle:

a. Load clean plates and dishes

to be warmed.

b. Select DRYING HEAT ON.

c. Leave the door unlatched.

d. Slowly turn the Cycle

Indicator Dial clockwise ~

to the DRY/PLATE WARMER position.

e. Latch the door to start the cycle.

WATER

SAVER

DRY/PLATE

WATER

SAVER

—

OFF

&HO

DRYPLATE

washing

RINSE

WARMER