- ページ 12

食器洗い機 Ariston LFC 3C26 W XのPDF デイリー・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ariston LFC 3C26 W X 25 ページ。

OPTIONS AND FUNCTIONS

OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL).

If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times

and beeps will sound. The option will not be enabled.

ZONE WASH 3D

Option works with one rack at once. In particular, we recommend

to use it with Mixed and Intensive cycles - thanks to the

additional 3D water jets placed on the bottom o the cavity,

ZONE WASH 3D option allows to save energy or to increase the

washing performance of the dishwasher:

• ZONE WASH 3D + MIXED CYCLE: it allows to reduce energy

consumption up to 40%.

• ZONE WASH 3D + INTENSIVE CYCLE: it increases the washing

performances up to 40%. Ideal for very soiled mixed loads,

e.g. pans and saucepans, dishes with heavy encrustation

or difficult-to-clean crockery (grater, vegetable mill, dirty

cutlery).

How to activate the option:

1. Select a compatible cycle

2. By default the appliance washes dishes in all racks. To wash

only the specific rack, press this button repeatedly:

shown on the display (only lower rack)

shown on the display (only upper rack)

shown on the display (option is OFF and the appliance will

wash dishes in all racks).

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

If upper rack is removed, please apply detergent directly

to tub instead of detergent dispenser.

KEYLOCK

A long press (for 3 seconds) of ZONE WASH 3D button, will

activate the KEYLOCK function. The KEYLOCK function will block

the control panel except the ON/OFF button. To deactivate

the KEYLOCK, long press again.

WATER TAP CLOSED – Alarm

Flashes when there is no inlet water or water tap is closed.

SHORT TIME

This option can be used to reduce the duration of the main

programs while maintaining the same washing and drying

performance levels.

After selecting the program, press the SHORT TIME button

and the indicator light will switch on. To deselect the option,

press the same button again.

TABLET (Tab)

This setting allows you to optimize the performance

of the program according to the type of detergent used.

A long press (for 3 seconds) of the SHORT TIME button

(the corresponding symbol will light up), will

the function if you use combined detergents in tablet form

(rinse aid, salt and detergent in 1 dose).

If you use powder or liquid detergent, this option should be off.

DELAY

The start of the program may be delayed for a period of time

between 0:30 and 24 hours.

1. Select the program and any desired options. Press the DELAY

button (repeatedly) to delay the start of the program.

Adjustable from 0:30 to 24 hours. With each press of the button,

the delay start increases by: 0:30 if selection below

4 hours, 1:00 if selection is below 12 hours, 4 hours if selection

is above 12 hours. If 24 hours reached, and the button is

pressed, the delayed start is deactivated.

2. Press the START/PAUSE button: the timer will begin counting

down;

3. Once this time has elapsed, the indicator light switches off

and the program begins automatically.

If at the time of the countdown the START/PAUSE button is

pressed again the DELAY option is cancelled and the selected

program starts automatically.

The DELAY function cannot be set once a program has

been started.

DRAIN OUT

To stop and cancel the active cycle, the Drain Out function

can be used.

A long press of START/PAUSE button, will activate the DRAIN

OUT function. The active program will be stopped and the water

in the dishwasher will be drained out.

ActiveDry

ActiveDry is a convection drying system which automatically opens

the door during/after drying phase to ensure exceptional drying

performance every day. Door opens at the temperature that is safe

to your kitchen furniture, thus door will not be opened when the option

of SHORT TIME is on.

As additional steam protection, special designed protection foil is added

together with the dishwasher (depending on the model type - can

be the need to buy it). To see how to mount protection foil please refer

to (INSTALLATION GUIDE).

ActiveDry functionality could be disabled by the user as follows:

• To DISABLE: Switch On, then switch Off. Keep the P button pressed

for 5 sec., at the end of 5 sec the dishwasher plays a short beep. Switch

On the machine, the display shows „oOF".

• To ENABLE: Switch On, then switch Off the machine. Keep the P button

pressed for 5 sec., at the end of 5 sec the dishwasher plays a short beep.

Switch On the machine, the display shows „oOn".

activate