- ページ 7

食器洗い機 Ariston LFP 5P31 WLT XのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston LFP 5P31 WLT X 45 ページ。

ページを印刷する

UPPER RACK

Load delicate and light dishes:

glasses, cups, saucers, low salad

bowls.

The upper rack has tip-up

supports which can be used in a

vertical position when arranging

tea/ dessert saucers or in a lower

position to load bowls and food

containers.

(loading example for the upper

rack)

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be fold or

unfold to optimize the arrangement of

crockery inside the rack. Wine glasses

can be placed safely in the foldable

flaps by inserting the stem of each

glass into the corresponding slots.

Depending on the model:

• to unfold the flaps there is needed

to slide it up and rotate or release it

from the snaps and pull it down.

• to fold the flaps there is needed

to rotate it and slide flaps down or

pull it up and attach flaps to the snaps.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids

should ideally be placed at the sides to avoid interferences with the

spray arm.

The lower rack has tip-up supports which can be used in a vertical

position when arranging plates or in a horizontal position (lower) to

load pans and salad bowls easily.

The lower rack has a Space Zone (A), a special pull-out support in the

rear of the rack that can be used to support frying pans or baking pans

in upright position, thus taking up less space.

In order to use it, just get hold of the coloured grip and pull it upwards

(B) while rotating it forward. The supports can slide right and left to fit

the size of the crockery.

ZONE WASH 3D

Zone Wash 3D uses additional water jets located both: in the lower

and upper part of the dishwasher (marked with orange color) to wash

more intensively heavily soiled items by increasing water coverage on

dishes.

Example: Load pots and casseroles facing lower part of Zone Wash 3D

components and activate the Zone Wash 3D option on the panel.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper rack can be adjusted: high position to place

bulky crockery in the lower basket and low position to make the most

of the tip-up supports by creating more space upwards and avoid

collision with the items loaded into lower rack.

The upper rack is equipped with a Upper Rack

height adjuster (see figure), without pressing

the levers, lift it up by simply holding the rack

sides, as soon as the rack is stable in its upper

position.

To restore to the lower position, press the

levers A at the sides of the rack and move the

basket downwards.

We strongly recommend that you do not ad-

just the height of the rack when it is loaded.

NEVER raise or lower the basket on one side

only.

(loading example for the lower rack)