ページを印刷する
11. DOOR EXTENSION
Fig. 11-1
•
The Door Extension (Fig. 11-1 & 11-2) is secured to the Dishwasher using two
(2) tension clips (Fig. 11-3 & 11-4) on both the left and right sides. The tension
clips insert into cut-outs on the left and right Side Support Plates (Fig. 11-5).
•
To remove the Door Extension, first release the center clip (Fig. 11-2). Then
push out on the right side, this will disengage the locking clips.
TECH NOTE: Access to the Door Extension can be made easier if the
Dishwasher Door is opened slightly. Do not attempt to pull the
Door Extension forward to remove, this may damage the
locking clips.
•
When re-installing the Door Extension make sure to align the lower corners
onto the small rail that is located on the bottom of the Side Support Plate
(Fig.11-6). Once in position on the rail, the Door Extension can be pivoted into
place and the tension clips locked it into position.
REPAIR MANUAL
Fig. 11-3
Fig. 11-4
INSIDE LEFT CORNER
L 63 / LL 64 / LL 65
LI 640 / LI 670 / LI 700
Fig. 11-2
Fig. 11-5
Fig. 11-6
Page: 9