- ページ 4

アクセサリー Aeotec Doorbell 6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec Doorbell 6 7 ページ。
Aeotec Doorbell 6 にも：ユーザーマニュアル (3 ページ)

1. Affix Doorbell 6 Wall Mount Plate in any desired location near an outlet.

a. Use 3x 20mm screws or double-sided tape.

b. Lock the Doorbell 6 into place where the mount is installed.

How to install Button

Avoid exposing Button to direct sunlight where possible to avoid UV damage and reduced battery performance.

1. Select an installation location for Button. Do not yet install it.

2. Power on Button. a. Remove the 2 screws from Button's rear to open its battery cover and install the provided

CR2450 battery with the positive (+) on top. b. Replace the battery cover and the 2 screws.

3. Test the wireless connection by pressing Ring Button to trigger a doorbell alert. Select an alternative installation

location for Chime if the connection is poor.

4. Install Button. a. Affix the mounting plate to the selected surface; affix it using either 2 × 20mm screws or double-