- ページ 4

アクセサリー Aeotec MultiSensor 7のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec MultiSensor 7 8 ページ。
Aeotec MultiSensor 7 にも：ユーザーマニュアル (5 ページ)

22/07/2021

may damage the product.

Contains small parts; keep away from children.

Quick Start.

Determine the power type.

MultiSensor 7 can be a sleeping battery device or a repeater as a USB powered device. Make sure you select your

preferred power type before you start pairing.

Any time you change the input power type (ie. Battery to USB power), you must re-include as your Z-Wave hub will

only understand if it is a sleeping device or a Repeater device upon its ﬁrst pair into your controller.

For a USB powered installation (acts as a repeater upon initial pair):

1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover oﬀ.

2. Insert the microUSB of the provided USB cable into your sensor's microUSB port.

3. Insert the larger end of the USB cable into a computer or any 5V adapter which will immediately power your

MultiSensor 7.

4. Make sure to seat the Battery Cover back onto the MultiSensor 7 and lock it in by sliding the Unlock button

RIGHT.

For a battery powered installation (acts as a sleeping device upon initial pair):

1. Remove the battery cover by sliding the Unlock button LEFT, then pull the cover oﬀ.

https://aeotec.freshdesk.com/support/solutions/articles/6000232605-multisensor-7-user-guide

MultiSensor 7 user guide : Aeotec Help Desk

4/8