- ページ 7

ウォーターヒーター Ariston JOVIS 80のPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。Ariston JOVIS 80 25 ページ。

Installation Method

Note: the product must be installed by qualified personnel.

A. Drill two holes of 100mm in depth on the solid wall in horizontal/vertical direction by percussion drill

based on the exact model(b).

B. Insert the expansion bolt into the holes, then screw tightly the hook and let it upward (Figure A)

C. Put the hand rack which is on the upper of electric water heater,on the hook of expansion bolt cor-

rectly and tightly.

D. All the tubes are G1/2', Connect properly the quipped water mixing valve,

One-way release valve,three-way inlet tube and three-way outlet tube according to different models

E. While in the case of little space,the electric water heater can be installed in the places where are

weather resistant,but in order to protect the thermal loss of the pipeline,the installation location

should be as close as possible to the water using location

F. Before use,you should completely check and verify the unit current is matching with the power sup-

ply and the wire capacity etc

Warning: you should check the wall which is to be installed the electric water heater onto is solid and

can undertake the weight of full capacity,the expansion bolts are prohibited installed in the joint part.

Figure A

distance

Figure B

7 / EN