- ページ 2

アクセサリー Aeotec ZWA011のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aeotec ZWA011 11 ページ。
Aeotec ZWA011 にも：ユーザーマニュアル (9 ページ)

Quick start

This is a secure Alarm Sensor. To run this device please insert fresh 1 * 1/2 AA batteries. Please make

sure the internal battery is fully charged.

The DSK for the S2 inclusion can be found inside the sensors

packaging.

If your Z-Wave gateway supports SmartStart: scan the QR code on Door / Window Sensor 7 using the

gateway's app. Your sensor will join your Z-Wave network automatically.

Please read this manual carefully. Failure to follow the recommendations in this manual may be

dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for

any loss or damage resulting from failure to comply with the instructions in this manual or any other

material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not

dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited

for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming

every message (two-way communication) and every mains

powered node can act as a repeater for other nodes

(meshed network) in case the receiver is not in direct

wireless range of the transmitter.

This device and every other certified Z-Wave device can

be used together with any other certified Z-Wave device

regardless of brand and origin as long as both are suited

for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as

this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower

level of security to maintain backward compatibility.

SmartStart. Available in selected Z-Wave Plus devices built upon 500 series technology and all devices

built upon 700 series technology, SmartStart lets you setup Z-Wave devices in seconds. Using SmartStart

enabled apps, simply scan the QR code on any compatible app to connect it to your Z-Wave gateway.

For more information about Z-Wave technology, devices, white papers etc. please refer to

www.z-

wave.info.

The AEOTEC Door/Window Sensor 7 Pro is a sensor, which detects if your window is opened or closed.

The sensor is easily retrofittable.

Thanks to its slim design the AEOTEC Door/Window Sensor 7 Pro can be installed unflashy on every