- ページ 5

コントローラー Dings DS-OLBS6-FSCのPDF テクニカル・マニュアルをオンラインで閲覧またはダウンロードできます。Dings DS-OLBS6-FSC 8 ページ。

Dimension / Functions and Usage

5. Dimension

96.5

This drive provide below two adjust methods for the user to choose:

Inner potentiometer speed adjustment : rotate the potentiometer on the driver panel

counterclockwise, the rotate speed of the motor will decrease, rotate the potentiometer on

the driver panel clockwise, The rotate speed become higher. If you use external input to

adjust speed, make sure the potentiometer is set in the min. state.

External speed adjustment : Connect on the GND and +5V of the drives, speed can be

adjusted on external potentiometer ((5K~100K) when connect SV terminal. Input simulate

voltage through other control command (e.x. PLC, SCM etc.) to SV terminal to achieve the

speed adjust as well (relative GND). The range of the SV terminal is DC OV~+5V, the

relevant motor speed is 0~rated speed.

External digital signal speed regulation : Add 5V between SV and GND, speed can be

adjusted by PWM control between the 1KHz~2KHz, motor speed is influenced by duty. At

this time, by adjusting the R-SV potentiometer, SV digital signal amplitude can be 0~1.0 ratio

: 150×97×48mm

P/A

R-SV

page│5