- ページ 2

スイッチ Aeotec AEOEZW132のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aeotec AEOEZW132 10 ページ。 Dual nano switch with power metering

ページを印刷する

7-11-2020

Installation

Notes for the wire connection ports:

N ? Power input for neutral

L ? Power input for live

IN ? Input for load power supply

OUT1 ? Output for load 1

OUT2 ? Output for load 2

S1 ? External switch control for load 1

S2 ? External switch control for load 2

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the

devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This

controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Inclusion

1. Install the device according to the instructions.

2. Press the button 2 times quickly on the Dual Nano Switch.

Exclusion

1. Press the button once on Dual Nano Switch.

Product Usage

Click one time 1 Send out a Node info without Security CC in command class list

Quick press 2 times Send out a Node info that contains Security CC in the command

Quick press 4 times Activate the automatic identification mode for external switch S1. The blue LED will fast blink to indicate the Nano Switch is in this mode.

Quick press 6 times Activate the automatic identification mode for external switch S1. The green LED will fast blink to indicate the Nano Switch is in this mode.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

1. Make sure a device is in factory reset state before including. In doubt exclude before include.

manual.zwave.eu/backend/make.php?lang=en&sku=AEOEZW132

2/10