- ページ 9

スイッチ Aeotec NanoMote QuadのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Aeotec NanoMote Quad 10 ページ。
Aeotec NanoMote Quad にも：ユーザーマニュアル (9 ページ), クイック・スタート・マニュアル (5 ページ), 取扱説明書 (9 ページ)

NanoMote Quad offers three button action types, including short press, press and hold,

release.

Short press allows NanoMote Quad sends:

Central scene notification commands to the associated nodes.

Basic set command to the associated nodes.

Switch multilevel set command to the associated nodes.

Press and Hold (more than 2 seconds) allows NanoMote Quad sends:

Central scene notification command to the associated nodes.

Multilevel start level change command to the associated nodes.

Release allows NanoMote Quad sends:

Central scene notification command to the associated nodes.

Multilevel stop level change command to the associated nodes.

XVI. ADVANCED CONFIGURATION

NanoMote Quad offers a wide variety of advanced configuration settings. Below parameters can be

accessed from main controllers configuration interface.

Parameter No.32 Level of low battery.

Available settings: 10-50 (10% - 50%)

Default setting: 20 (20%)

Parameter size: 1[byte]

Parameter No.41 Enable send central scene notification.

0 - Disable.

1 – Enable.

Default setting: 1

Parameter size: 1[byte]

Parameter No.42 Setting the duration value of the command switch multilevel.

Available settings: 0-255

Default setting: 255

Parameter size: 1[byte]

Parameter No.43 Enable/disable the buzzer alarm when battery is running low.