- ページ 3

スイッチ Aeotec NanoMote QuadのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec NanoMote Quad 9 ページ。
Aeotec NanoMote Quad にも：取扱説明書 (10 ページ), クイック・スタート・マニュアル (5 ページ), 取扱説明書 (9 ページ)

ページを印刷する

Nano Mote Quad User Guide : Aeotec Group

4. Place the backcover back on then twist the back cover clockwise to lock the battery in place.

Adding your NanoMote Quad to your -Wave network.

With your NanoMote Quad now powered, it's time to add it to your Z-Wave network.

1. Place your Z-Wave primary controller/gateway enter into pairing/inclusion mode.

2. Take your NanoMote near to your primary controller.

3. Double click the NanoMote button (can be any button), the LED will blink rapidly with a white color.

4. I your NanoMote has been success ully added to your Z-Wave network, its white LED will be solid or about 10

seconds, then lash green to indicate it is awake. I the adding was unsuccess ul and the red LED will be solid or 2

seconds and then o , repeat the above steps.

5. I your NanoMote does not go to sleep on its own, press and hold or 2 seconds (or until LED turns orange) then

3 z 9

ttps://aeotec.fres desk.com/support/solutions/articles/6000184696-n...

9. 9. 2019, 15:53