- ページ 9

ボイラー Ariston 41-116-06のPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Ariston 41-116-06 48 ページ。 Microsystem

ページを印刷する

2.9

LUE

ONNECTIONS

. 2.5

Ø 60/100 mm

. 2.6

LUE

The provision for satisfactory flue termination must be made in accordance

with BS 5440-1.

The appliance must be installed so that the flue terminal is exposed to outside air.

The terminal must not discharge into another room or space such as an

outhouse or lean-to.

It is important that the position of the terminal allows a free passage of air

across it at all times.

The terminal should be located with due regard for the damage or

discolouration that might occur on buildings in the vicinity.

In cold or humid weather water vapour may condense on leaving the flue

terminal.

The effect of such "pluming" must be considered.

If the terminal is less than 2 metres above a balcony, above ground or above

a flat roof to which people have access, then a suitable terminal guard must

be fitted. When ordering a terminal guard, quote the appliance model

number.

A suitable terminal guard is available from:

TOWER FLUE COMPONENTS

Morley Road

Tonbridge

Kent TN9 1RA

The minimum acceptable spacing from the terminal to obstructions and

ventilation openings are specified in F

The boiler is designed to be connected to a coaxial flue discharge system.

YSTEM

ERMINAL

OSITION

A - Directly below an openable window or other opening

B - Below gutters, soil pipes or drain pipes

C - Below eaves

D - Below balconies or car-port roof

E - From vertical drain pipes and soil pipes

F - From internal or external corners

G - Above ground or balcony level

H - From a surface facing a terminal

I - From a terminal facing a terminal

J - From an opening in the car port

(e.g. door, window) into dwelling

K - Vertically from a terminal in the same wall

L - Horizontally from a terminal in the same wall

. 2.5.

300

200

300

600

1200

1500

300