- ページ 6

ボイラー Ariston 47-116-67のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Ariston 47-116-67 12 ページ。 Condensing wall-hung gas boiler

user's manual

Adjusting the heating

It is possible to set the temperature of the heating water by pressing

the buttons 12.

The temperature that may be obtained which varies from:

- 20°C to 45°C (low temperature)

- 35°C to 82°C (high temperature).

Domestic hot water temperature adjustment

only for CLAS HE EVO MODELS

It is possible to set the temperature of the domestic hot water

by adjusting the button 2 a temperature may be obtained which

varies from about 36°C to about 60°C.

The value set previously will fl ash on the display.

Switching off the heating

To switch off the heating, press the MODE button 3; the heating

operation symbol will disappear from the display. The Mode button

can be used to keep the domestic hot water production process

active or to place it in standby (modes deactivated).

In the fi gure below the boiler remains active only for the production

of domestic hot water, indicating the set temperature.

Switching off the boiler

To switch off the boiler press the ON/OFF button, the display will

switch off .

The Anti-frost Function is already active.

ATTENTION!!

Switch off the boiler completely by switching the external electri-

cal switch to the OFF position. Shut off the gas valve..

Clock Instructions

1. General layout

The mechanical clock covers a 24 hour period. Each tappet

represents 15 minutes A. An override switch is located on the clock

2. To set the time

To set the time of day, grasp the outer edge of the dial and turn

slowly clockwise until the correct time is lined up with the arrow C.

3. To Set the "On" and "Off " times

The clock uses a 24hours system. e.g. 8 = 8.00 am and 18 = 6.00

pm "ON" periods are set by sliding all tappets between the "ON"

time and the "OFF" time to the outer edge of the dial. The tappets

remaining at the centre of the dial are the "OFF" periods.

4. For operation

Put the selector switch B to the

heating by the clock. Put the switch B to "I" to select permanent

operation or to "0" to turn the central heating off permanently.

1 1

symbol to control the central