- ページ 5

スイッチ Aeotec WallMoteのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec WallMote 8 ページ。
Aeotec WallMote にも：クイックスタート (3 ページ), ユーザーマニュアル (9 ページ)

4.10.2017

You need to press the WallMote Quad's Action Button 2 times within 1 second when your security controller/gateway

starts the network inclusion.

The blue LED will be on for 2 seconds and then the orange LED will fast blink for 10 minutes (if the WallMote Quad

does not receive the Wake Up No

More Info command from primary Controller) to indicate the inclusion is successful.

Advanced Parameter Configurations.

Not all gateways will allow you to further configure your Z-Wave devices, but in the case that your gateway does allow

it, the WallMote Quad has some available parameter configurations that will allow you to configure it further to your

liking.

Touch beep

This will enable or disable the sound effects when you press or touch the sensing area. By default, this is

enabled.

Parameter 1 [1 byte]

0: Disable

1: Enable //default setting

Note: You can also enable or disable the sound effects via pressing and holding the Action Button for 12

seconds (the buzzer chirp once and the red LED will fast blink) and then release.

Touch vibration

This will enable or disable the vibration effects when you press or touch the sensing area. By default, this is

enabled.

Parameter 2 [1 byte]

0: Disable

1: Enable //default setting

Note: You can also enable or disable the vibration effects via pressing and holding the Action Button for 17

seconds (the buzzer chirp once and the red LED will be solid) and then release.

Button slide function

This will enable or disable the function of button slide.

Parameter 3 [1 byte]

0: Disable

1: Enable //Default Setting

WallMote Reports

This will allow you to configure what reports are sent when pressing WallMote Quads buttons.

Parameter 4 [1 byte]

1: Send Central Scene Command notification //Default Setting

3: Send Central Scene Command notification and Configuration Report.

Association table of the control buttons.

https://aeotec.freshdesk.com/support/solutions/articles/6000162392-wallmote-quad-user-guide-

WallMote Quad user guide. : Aeotec by Aeon Labs

5/8