- ページ 6

ボイラー Ariston GENUS 41-116-01のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Ariston GENUS 41-116-01 44 ページ。 Type c
Ariston GENUS 41-116-01 にも：取付説明書 (32 ページ)

Removing the electrodes

Supplied By www.heating spares.co Tel. 0161 620 6677

1. Remove rubber gasket "G" (see fig. 1.11) ;

2. Disconnect ignition leads by pulling downward (see fig. 1.12) ;

3. To remove the flame sensor disconnect the cable at its only connection

point close to the P.C.B. (see fig. 1.13) ;

Fig. 1.11

5. Remove screw "H" using a Philips No. 2 star tip screwdriver (see fig. 1.14) ;

6. Slide the electrode gently downward (see fig. 1.15).

Fig. 1.14

To replace, repeat the steps in reverse order, paying particular attention to the

following:

a - Centre the electrode in the positioning hole carefully, otherwise the

electrode may break;

b -Check that the cables have been connected correctly;

c - Check that the rubber gasket covers the cable/electrode connection

point completely.

Fig. 1.12

Fig. 1.15

Fig. 1.13

B005