- ページ 6

ボイラー Ariston micro Genius 27 MFFIのPDF 整備要領をオンラインで閲覧またはダウンロードできます。Ariston micro Genius 27 MFFI 28 ページ。 Type c boilers

3. Remove screw "H" (F

4. Gently slide the electrode downward (F

. 1.15

51 eps

52 eps

To replace, repeat the steps in reverse order, paying

particular attention to the following:

a - Centre the electrode in the positioning hole carefully,

otherwise the electrode may break;

b -Check that the cables have been connected correctly;

c - Check that the rubber gasket covers the cable/ electrode

connection point completely.

. 1.15);

. 1.16).

Removing the main heat exchanger

1. Drain the boiler of water;

2. Release the overheat thermostat sensor "I" (F

3. Release the two connection nuts "J" connecting the

exchanger to the flow and return pipes (F

4. Pull it straight out (F

75 eps

11 eps

. 1.16

6 eps

. 1.19).

Fig. 1.17

76 eps

. 1.17);

. 1.18);

. 1.18

. 1.19

B063