- ページ 11
ボイラー Ariston MICROCOMBI 23 MFFIのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Ariston MICROCOMBI 23 MFFI 25 ページ。 Wall-hung electronic ignition gas combination boiler ariston microcombi 23 mffi/ microcombi 27 mffi
Ariston MICROCOMBI 23 MFFI にも： ユーザーマニュアル (20 ページ), 整備要領 (28 ページ), エンドユーザマニュアル (8 ページ), マニュアル (4 ページ)
ページを印刷する
23 MFFI
Exhaust
Type
C12 (xx)
Coaxial
Systems
C32 (xx)
ø 60/100
C42 (xx)
Exhaust
Type
C12 (xy)
C32 (xy)
Twin Pipe
Systems
C42 (xy)
ø 80/80
C52 (xy)
C82 (xy)
T
P
WIN
IPE
S
YSTEMS
F
. 2.11
IG
Restrictor
NO Restrictor
ø 43 mm
L min = 0.5 m
L min = 2 m
L max = 2 m
L max = 4 m
Restrictor
NO Restrictor
ø 43 mm
L max = 11.5 m
L min = 11.5 m
L max = 43 m
L max = 11.4 m
L min = 11.4 m
L max = 40 m
Maximum
Risk of Condensation Forming
Extension
Piping not insulated
Exhaust/Air
ø 43
restrictor
L = 4 m
NONE
Maximum
Risk of Condensation Forming
Extension
Piping not insulated
Exhaust/Air
ø 43
restrictor
43 m
43 m
4.3 m
43 m
40 m
4.3 m
L = Sum of the total length of exhaust + air intake piping.
In calculating the lengths of the pipes, the
maximum length "L" must also take into
consideration
exhaust/air intake end terminals, as well
as 90° elbows for coaxial systems.
The C52 types must comply with the
following requirements:
1 - The exhaust/air intake pipes must
have the same diameter of
2 - If elbows are to be inserted into the
air intake and/or exhaust system, the
calculation of the overall length must
take into consideration the values for
each elbow, see the F
A
3 - The exhaust pipe must protrude by at
least 0.5 m above the top of the roof
in the event that it is located on the
opposite side of the building to the
side with the air intake (this condition
is not obligatory when the air intake
and exhaust are located on the same
side of the building).
FU007A
11
Piping insulated
NO
ø 43
restrictor
NONE
NONE
Piping insulated
ø 43
NO
restrictor
NONE
6.9 m
5.7 m
6.9 m
the
values
M
.
CCESSORIES
ANUAL
T
2.1
ABLE
NO
NONE
NO
NONE
21.7 m
for
the
80 mm.
ø
P
L U E
I P E