- ページ 5

ネットワークカード 3Com TokenLink 3C359BのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。3Com TokenLink 3C359B 8 ページ。 Pci network interface card
3Com TokenLink 3C359B にも：リリースノート (4 ページ)

ページを印刷する

3 If your PC's motherboard has a Remote Wake-Up

cable connector and you want to use this feature,

perform the following steps:

a Insert the Remote Wake-Up cable included in your

package into the 3-pin connector on the NIC.

Your PC may conform to new PCI standards that eliminate

the need for a Remote Wake-Up cable to deliver power to

the 3C359B NIC. If your PC is capable of delivering power

to the 3C359B NIC through a single pin in the PCI bus, then

there is no need to install the cable. See your PC's hardware

speciﬁcation and documentation for complete information.

WARNING: Install the NIC in the PC before inserting

the Remote Wake-Up cable into the 3-pin connector

on the NIC.

b Attach the cable to the connector on the PC motherboard.

For Remote Wake-Up installation details, see instructions in

Chapter 2 of the user guide.

For more information on Remote Wake-Up, see the

WAKEFAQ.TXT ﬁle located in the root directory on

TokenDisk diskette 1 or in the \DISK_1 directory on the

TokenLink Velocity XL CD.

4 Connect a token ring cable to the NIC.

For cabling details, see installation instructions in Chapter 2

and connector and cabling speciﬁcations in Appendix A of

the user guide.

5 Connect the other end of the cable to a network dual

access unit (DAU), a multistation access unit (MAU),

controlled access unit (CAU), or a token ring switch.

The 3C359B NIC can operate in full-duplex (simultaneous

send and receive) mode when attached to a Dedicated

Token Ring (DTR)-enabled switch. Operating in full-duplex

mode can optimize performance in switched environments

by doubling the available bandwidth for high-powered PC's

and servers running mission-critical applications.

6 Turn the PC power on.

The PCI system automatically conﬁgures the 3C359B NIC.

7 Choose the appropriate network device driver for

your operating system environment.

Installing the 3C359B NIC