- ページ 4

セキュリティセンサー Aeotec MULTISENSOR 6のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aeotec MULTISENSOR 6 13 ページ。 Z-wave water and flood sensor
Aeotec MULTISENSOR 6 にも：ユーザーマニュアル (13 ページ), マニュアル (3 ページ), ユーザーマニュアル (8 ページ), マニュアル (10 ページ)

ページを印刷する

Multisensor 6 user guide : Aeotec Group

Note: MultiSensor 6 can be powered by a single CR123A, though batteries will require changing more frequently. If

powering your MultiSensor 6 with a sole battery, insert it into the battery holder marked 1.

WARNING: Not compatible to rechargeable CR123A batteries (3.7V)

3. Make sure to seat the Battery Cover back onto the MultiSensor 6 and lock it in.

Adding your MultiSensor 6 into a Z-Wave Network.

With it powered on, it's now time to add your MultiSensor 6 to a Z-Wave network. To pair MultiSensor 6, you are not

limited to only the Z-Stick or Minimote. You may use any Z-Wave Gateway to pair MultiSensor 6, but compatibility

and how the sensor shows ultimately depends on the gateway and software integration of products.

https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-

29-09-2020 17:00

Pagina 4 van 13