- ページ 4

オーブン Ariston FA2844PIXAAUSのPDF デイリー・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Ariston FA2844PIXAAUS 8 ページ。

ページを印刷する

. PROGRAMMING COOKING

You will need to select a function before you can start

programming cooking.

DURATION

Keep pressing

until the

flashing on the display.

Use

to set the cooking time you require, then

press

to confirm.

Activate the function by turning the thermostat knob

to the temperature you require: An audible signal will

sound and the display will indicate that cooking is

complete.

Notes: To cancel the cooking time you have set, keep

pressing

until the

icon starts flashing on the display,

then use

to reset the cooking time to "00:00".

This cooking time includes a preheating phase.

PROGRAMMING THE END COOKING TIME/

DELAYED START

After a cooking time has been set, starting the

function can be delayed by programming its end

time: Press

until the

start flashing on the display.

Use

to set the time you want cooking to end

and press

to confirm.

Activate the function by turning the thermostat knob

to the temperature you require: The function will

remain paused until it starts automatically after the

period of time that has been calculated in order for

cooking to finish at the time you have set.

Notes: To cancel the setting, switch the oven off by turning

the selection knob to position " ".

END OF COOKING

An audible signal will sound and the display will

indicate that the function has finished.

Turn the selection knob to select a different function

or to position " " to switch the oven off.

Please note: If the timer is active, the display will show "END"

alternately with the remaining time.

icon and "00:00" start

icon and the current time

. SETTING THE TIMER

This option does not interrupt or program cooking

but allows you to use the display as a timer, either

during while a function is active or when the oven is

off.

Keep pressing

until the

flashing on the display.

Use

to set the time you require and press

to confirm.

An audible signal will sound once the timer has

finished counting down the selected time.

Please note: To cancel the timer, keep pressing

the

icon starts flashing, then use

"00:00".

. AUTOMATIC CLEANING FUNCTION – PYRO

Do not touch the oven during the Pyro cycle.

Keep children and animals away from the oven

during and after (until the room has finished

airing) running the Pyro cycle.

Remove all accessories (including the shelf guides)

from the oven before running the function.

If the oven is installed below a hob, make sure that

all the burners or electric hotplates are switched off

while running the self-cleaning cycle.

For optimum cleaning results, remove the worst

soiling with a damp sponge before using the Pyro

function. We recommend only running the Pyro

function if the appliance contains heavy soiling or

gives off bad odours during cooking.

To activate the automatic cleaning function, turn the

selection knob and the thermostat knob to the

The function will be activated automatically, the door

locked and the light inside the oven switched off:

The display will show the time remaining to the end,

alternating with "Piro" (Pyro).

Please note: It is only possible to programme the end time

of this function. The duration is automatically set to 120

minutes.

Once the cycle has been completed, the door remains

locked until the temperature inside the oven has

returned to a safe level. Air the room during and after

running the Pyro cycle.

icon and "00:00" start

until

to reset the time to

icon.