- ページ 2

セキュリティセンサー Aeotec ZWA039のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Aeotec ZWA039 12 ページ。 Temperature & humidity sensor

Quickstart

This is a secure Alarm Sensor. To run this device please insert fresh 1 * CR2477 batteries. Please make

sure the internal battery is fully charged. Triple clicking the central button includes (adds) and excludes

(removes) the device. A click on the central button will wake up the device. The device supports the

Security S2 framework with unauthenticated and authenticated network keys. The DSK for the S2

inclusion can be found inside the sensors packaging. Please follow the instructions on the central

controller when including.

The device also supports SmartStart. Please scan the QR code on the outlet cover of the device and

your controller will add the device automatically when powered up.

Please read this manual carefully. Failure to follow the recommendations in this manual may be

dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable

for any loss or damage resulting from failure to comply with the instructions in this manual or any other

material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not

dispose of electronic equipment or batteries in a fire or near open heat sources.

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is

suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication)

and every mains powered node can act as a repeater for other nodes (meshed network) in case the

receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-

Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as

this device provides the same or a higher level of security. Otherwise it will automatically turn into a

lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-

wave.info.

SmartStart. Available in selected Z-Wave Plus

devices built upon 500 series technology and all

devices built upon 700 series technology, SmartStart lets you setup Z-Wave devices in seconds. Using

SmartStart enabled apps, simply scan the QR code on any compatible app to connect it to your Z-Wave

gateway.