ネットワークカード 3Com XRN 3C17715のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。3Com XRN 3C17715 7 ページ。 3com xrn interconnect modules & kit user guide

3Com XRN 3C17715 ユーザーマニュアル
XRN Interconnect Module (3C17716)
XRN Interconnect Module Kit (3C17715)

User Guide

DUA1771-5AAA02
C o n
C o n
( m a
( m a
x ) 1
x ) 1
9 2 0
9 2 0
I
NTRODUCTION
Introducing the XRN Interconnect Module Kit
With an XRN Interconnect Module Kit (3C17715) you can
interconnect two Switch units.
This kit contains:
Two XRN Interconnect Modules (3C17716)
One standard XRN Interconnect Cable (3C17721)
The Switches that support this module are:
®
SuperStack
3 Switch 4900
SuperStack 3 Switch 4900 SX
SuperStack 3 Switch 4924
SuperStack 3 Switch 4950
®
3Com
Switch 4060
3Com Switch 4050
The Interconnect Module requires management software
!
version 3.0 or later to be installed on the Switch. For
instructions on upgrading the management software, refer
to the documentation supplied with your Switch.
You can gather information about the status of the
!
Module and its packet activity using the Expansion Module
LEDs on the front of the Switch and the LEDs on the front
s o l e
s o l e
0 , 8
0 , 8
, 1 , N
, 1 , N
S / N
S / N
: X X
: X X
X X /
X X /
7 X X
7 X X
X X X
X X X
X X X
X X X
X
X
U n i
t 1
U n i
t 2
A c t
i v i t y
S t a
t u s
3 C 1
3 C 1
7 7 1
7 7 1
6 X
6 X
R N
R N
I n t e
I n t e
r c o
r c o
n n e
n n e
c t M
c t M
o d u
o d u
panel of the Module. For explanations on how the LEDs
work, see the "LED Function Tables" on page 3.
The Interconnect Cable
The Interconnect Cable is used to interconnect two Switch
units, both fitted with Interconnect Modules.
The standard Interconnect Cable is 1 m (3.28 ft) long and
color-coded with a yellow marker at one end and a blue
marker at the other end.
The end of the Interconnect Cable that you connect to the
Switch determines the identity of the Switch. The Switch
that has the blue end of the cable connected to it will be
Unit 1. The Switch that has the yellow end of the cable
connected to it will be Unit 2.
The terms Unit 1 and Unit 2 are used simply to identify
!
the Switch units for management purposes only.
Figure 1 The Interconnect Cable
Blue Marker / Unit 1
1
l e
l e
Yellow Marker / Unit 2