- ページ 3

アダプター Aeotec Z-Stick Gen5のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Aeotec Z-Stick Gen5 11 ページ。 Z-wave usb adapter
Aeotec Z-Stick Gen5 にも：マニュアル (2 ページ), ユーザーマニュアル (5 ページ)

ページを印刷する

Engineering Specifications and Advanced Functions for Developers

Aeotec Z‐Stick Gen5 is a self‐powered Z‐Wave USB adapter with remote network creation capabilities

(independent from external power and host microprocessor). By being able to remotely include/remove Z‐

Wave devices, this greatly simplifies Z‐Wave network installation. When connected to a host controller (via

USB), it enables the host controller to take part in the Z‐Wave Network.

It can be included and operated in any Z‐wave network with other Z‐wave certified devices from other

manufacturers and/or other applications. All non‐battery operated nodes within the network will act as

repeaters regardless of vendor to increase reliability of the network.

1. Library and Command Classes

1.1 SDK: 6.51.02

1.2 Library



Basic Device Class: BASIC_TYPE_STATIC_CONTROLLER



Generic Device Class: GENERIC_TYPE_STATIC_CONTROLLER



Specific Device Class: SPECIFIC_TYPE_PC_CONTROLLER

2. Technical Specifications

Up to 500 feet/150 metres outdoors in normal mode or 1310 feet/400

Operating Distance:

metres outdoors in PA mode.

3. Familiarize Yourself with Your Z‐Stick

3.1 Interface

4. Independence Mode and Serial API‐Mode Functions

4.1 Independence Mode function of Action Button

Button action

Click one time

Adding/Including Z‐Wave Device into the Z‐Wave network:

1. Unplug the Z‐Stick from the USB connector and then tap the Action Button. (The blue

LED will blink slowly.)

2. To include a new Z‐Wave device into the network, simply go to the device with the Z‐

Aeotec Z‐Stick Gen5

(V1.00)

Description